Hydraulic Dredge Pump with Side Cutters

Amoshydro® Hydraulic Dredge Pump with Side Cutters is a heavy-duty, fully submersible solution designed to handle up to 70% solids by weight, making it ideal for sand, silt, sludge, and slurry. Built with abrasion-resistant materials for a long service life in harsh environments, this pump eliminates suction lift limitations and priming needs. Compatible with cutterheads and agitators to break up compacted material and prevent clogging, it also supports remote and autonomous operation to ensure maximum safety in hazardous or hard-to-reach areas.
Configure for a perfect match. Fill out our technical sizing guide to ensure seamless excavator integration

Overview

In riverbed dredging, tailing pond cleanouts, and marine construction, suction-only pumps frequently fail when encountering consolidated strata or cohesive soil beds. The Amosahydro® Hydraulic Dredge Pump with Side Cutters resolves this operational bottleneck by integrating dual mechanical excavators directly onto the pump chassi.
Mounted to standard excavators, amphibious excavators, or crane suspension rigs, the dual side cutters rotate mechanically to break down, slice, and liquefy packed material surrounding the suction inlet. The integrated agitator homogenizes the mixture into a fluid slurry before it enters the high-chrome volute casing, maintaining continuous flow and preventing intake clogging even at extreme operating depths.

Features

1.High abrasion resistance with high chrome wear parts;
2.Low rotation speed to reduce wear effect;
3.Hydraulic dredge sludge pump handle up to 70% solids by weight;
4.Safe hydraulic drive can be used where electric power is hazardous or impractical;
5.Submersible hydraulic canals dredging pump designed to be mounted and dismounted at need without wasting time;
6.Submersible pump driven by diesel hydraulic power pack is available with cutter head, water jet and auger head;
Hydraulic submersible extract clean sand pump is compatible with all brands of hydraulic excavators.

Advantage

Active Mechanical Cutting: Dual rotating cutter heads shear consolidated banks, compacted sand, and sticky clay before suction entry.
Consistent High-Density Output: Achieves solids concentrations up to 70% by weight, minimizing water usage and maximizing operational efficiency.
Full Hydraulic Torque at Depth: Unlike electric submersibles restricted by water pressure seals, hydraulic motors maintain peak torque regardless of submersion depth.
Universal Carrier Mounting: Seamlessly connects to auxiliary breaker/shear lines on CAT, Komatsu, Volvo, SANY, Hitachi, Kobelco, and Doosan excavators.

Parameters

Hydraulic Submersible Sand Pump SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m³/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-S100-15150100151110002528253013
HTU-S150-201501502018.5100030452530
HTU-S200-151502001518.5100030452530
HTU-S150-221501502222100030552555
HTU-S200-171502001722100030552555
HTU-S300-102003001022100035552555
HTU-S150-30150150303010002080258020
HTU-S250-201502502030100030802580
HTU-S100-50150100504510002010725110
HTU-S250-30150250304510003510725110
HTU-S400-20200400204510004010725110
HTU-S150-4515015045551000251252513030
HTU-S250-35150250355510004012525130
HTU-S400-25200400255510004012525130
HTU-S500-18200500185510004012525130
HTU-S200-45150200457010002516027160
HTU-S350-35200350357010004016027160
HTU-S450-25200450257010004016027160
HTU-S550-20200550207010004016027160
HTU-S200-6015020060901000302002720040
HTU-S400-40200400409010005020027200
HTU-S500-28200500289010005020027200
HTU-S600-25200600259010005020027200
HTU-S400-50200400501101000352502725060
HTU-S600-302506003011010005025027250
HTU-S800-253008002511010005025027250
HTU-S1000-2030010002011010006025027250
HTU-S500-552005005513210005025027300Dual-Pump Confluence 40
HTU-S800-353008003513210005025027300
HTU-S1000-2330010002313210006025027300
HTU-S650-522006505216010004035527360Dual-Pump Confluence 60
HTU-S1000-3030010003016010005035527360
HTU-S800-553008005522010005050027500Dual-Pump Confluence 80
HTU-S1000-4030010004022010005050027500
HTU-S1250-3535012503522010005550027500
HTU-S1600-3035015003022010005550027500
HTU-S2000-2040020002022010006050027500
HTU-S1200-5030012005028010005071025710Dual-Pump Confluence 100
HTU-S1500-4035015004028010005071025710
HTU-S1500-3535015003528010005571025710
HTU-S1750-3035017503028010005571025710
HTU-S2000-2540020002528010006071025710
HTU-S1500-504001500503151000601000201000Dual-Pump Confluence 120
HTU-S2000-354002000353151000601000201000
Hydraulic Submersible Slurry Pump for Mud SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-S50-308050301510001328224213
HTU-S100-201001002015100020
HTU-S150-15100/1501501515100020
HTU-S50-508050502510001345256820
HTU-S100-301001003025100020
HTU-S150-221501502225100030
HTU-S200-181502001825100030
HTU-S150-301501503030100030552583
HTU-S200-251502002530100030
HTU-S300-151503001530100030
HTU-S150-5015015050451000308025120
HTU-S200-352002003545100045
HTU-S300-252003002545100045
HTU-S400-202004002045100045
HTU-S200-5515020055651000301072516030
HTU-S300-352003003565100050
HTU-S500-202005002065100050
HTU-S250-5515025055751000301252519040
HTU-S400-302004003075100055
HTU-S500-252005002575100055
HTU-S600-202006002075100055
HTU-S280-6015028060951000301602524060
HTU-S500-302005003095100055
HTU-S600-252006002595100055
HTU-S350-702003507012010003020027300Dual-Pump Confluence 40
HTU-S400-5020040050120100055
HTU-S500-4020050040120100055
HTU-S700-3020070030120100055
HTU-S800-252508002512010007026060
HTU-S400-702004007014510005525027380Dual-Pump Confluence 40
HTU-S500-5020050050145100055
HTU-S700-3520070035145100055
HTU-S800-3025080030145100070330
Hydraulic Submersible Slurry Pump for Big Solids SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
HTU-S400-2520040025708016025160
HTU-S500-2020050020708016025160
HTU-S500-3025050030908020025200
HTU-S700-2025070020908020025200
HTU-S600-30250600301108025027250
HTU-S800-25250800251108025027250
HTU-S1000-183001000181108025027250

Peformance Curve

Qh Sand Singleside Panel
Qh Mud Singleside Panel
Qh Bigsolids Singleside Panel

Structural diagram

Hydraulic Dredging Pump With Bottom Cutters
No.Part NameMaterial
1Inernal Five-Star High-Pressure MotorCast Iron
2Shaft Sleeve2Cr13
3Bearing HousingQ235
4Upper BearingGCr4
5Pump Shaft40Gr
6Skeleton SealRubber
7Lower BearingGCr4
8Bearing Lock NutA2-70
9Connecting FlangeQ235
10Mechanical SealAlloy
11Lock NutA2-70
12Agitator AssemblyQ235
13Shaft Head Pressure Sleeve AssemblyA2-70
14Agitator Head Tooth RootWear Resistant Alloy
15Agitator Head Tooth TipWear Resistant Alloy

Application

Navigational River & Port Dredging: Desilting harbor basins, clearing shipping channels, and excavating compacted sand bars to maintain vessel draft depths.
Mine Tailings & Settling Pond Cleanouts: Recovering consolidated mineral slurry, iron ore tailings, coal slurry, and heavy solids from retention ponds.
Commercial Sand & Gravel Mining: Underwater sand extraction directly from river beds and ocean borrow areas for aggregate production.
Bridge Foundation & Caisson Excavation: Clearing mud, gravel layers, and bored pile slurry inside deep cofferdams and caissons.
Canal & Industrial Lagoon Dredging: Removing heavily silted sediment, organic sludge, and industrial mill scale from channels and cooling basins.

Hydraulic Submersible Dredging Pump With Side Agitator
get your copy of the Amoshydro®Hydraulic submersible slurry pump handbook

Excavator brands

Amoshydro® hydraulic submersible slurry pumps are engineered with a versatile mounting interface, allowing for seamless integration with the hydraulic systems of all major global excavator brands. Whether you operate a standard crawler or a specialized amphibious machine, our pumps are compatible with:

Excavator Brands (2)
Excavator Brands (1)
Excavator Brands (3)
Excavator Brands (4)
Excavator Brands (5)
Excavator Brands (6)
Excavator Brands (7)
Excavator Brands (8)
Excavator Brands (9)
Excavator Brands (10)
Excavator Brands (11)
Excavator Brands (12)

FAQ

Side cutters actively dig, break, and loosen hard-packed sand, sticky clay, and compacted mud banks that a standard agitator cannot break up. This keeps material moving into the pump intake and maintains continuous high solids concentration.

Yes. The pump assembly mounts to the arm or boom of your excavator via a dedicated mounting bracket. It operates using the excavator’s auxiliary hydraulic lines (e.g., breaker/shear hydraulics).

All wet-end components (impeller, volute, agitator, wear plate, and cutter teeth) are manufactured from high-chrome alloy (Cr27 / A05) with a hardness rating of 60+ HRC for maximum abrasion resistance.

Side cutters feature hardened, replaceable cutter teeth angled to mechanically slice through cohesive clay layers. This prevents the pump suction from sealing off or forming dry cavities.

Yes. Because the side cutters are driven by independent hydraulic motors, the operator can easily reverse hydraulic flow from the cab to dislodge trapped debris.

No products selected for comparison.

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message