Hydraulic Submersible Gravel Pump

Specification Parameter
Discharge Size:100 mm – 400 mm (4" – 16")
Flow Capacity:100 – 2,000 m³/h
Head Range:15 – 65 m
Max. Solid Concentration:Up to 60% by weight / 30% by volume
Drive Compatibility:Excavator hydraulic circuit or standalone HPU (150–350 bar)
Material Standard:High-Chrome Alloy (27% Cr / A05)
Mechanical Seal:Double Silicon Carbide Mechanical Seal
Configure for a perfect match. Fill out our technical sizing guide to ensure seamless excavator integration

Amoshydro®hydraulic submersible gravel pump is a heavy-duty, robust piece of equipment engineered to handle the most demanding material transfer challenges. Unlike standard water or clear-liquid pumps, these specialized units are designed to operate entirely underwater, driven by a hydraulic power pack rather than electricity. This makes them the go-to solution for moving high-density slurries containing large, abrasive solids like stones, pebbles, sand, and heavy silt without clogging

Amoshydro®Hydraulic Submersible Gravel Pump are also named Hydraulic excavator submersible mud dredging pump, Hydraulic excavator sand dredging pump,Hydraulic submersible solids handling pumps,Hydraulic submersible mud pump,Hydraulic submersible sand sludge pump,Hydraulic submersible agitator pump,Hydraulic submersible slurry pump,excavator boom mounted dredge pump,hydraulic submersible silt removal pump,hydraulic submersible bentonite pump etc.

Excavator Mounted Submersible Dredging Pump (1)

High-Chrome Alloy Components: Impellers, wear plates, and volutes are predominantly cast from high-chrome alloys (such as 27% high-chrome iron), providing exceptional resistance to quartz sand, gravel, and sharp mining tailings.

Dual Side Cutters and Agitators: Fitted with heavy-duty mechanical side cutters or rotating agitators, the system breaks up compacted clay, packed sand, and consolidated sediment directly at the intake. This pre-processing mechanism ensures a high solids concentration by weight (often reaching up to 60%–70%) entering the suction zone.

Robust Bearing Assemblies: Heavy-duty grease- or oil-lubricated bearing housings with multi-lip seals and mechanical face seals prevent slurry ingress into the drive shaft, guaranteeing long operational lifespans under deep submergence.

Operating a heavy-duty submersible pump on a 30-ton excavator requires exceptional hydraulic synergy. The pump taps directly into the carrier machine’s auxiliary hydraulic circuit, converting hydraulic energy into immense mechanical torque at the pump shaft.

  • Seamless Flow & Pressure Match: The 30-ton excavator class provides the ideal hydraulic oil flow and pressure thresholds to drive high-capacity motors without requiring an auxiliary standalone power unit (HPU).
  • Stepless Speed Regulation: Operators can precisely control impeller speeds and torque output from the cabin, adapting instantly to varying slurry densities, mud viscosities, and solid concentrations.
  • Built-in Overload Protection: The hydraulic drive system offers inherent pressure-relief safeguards, protecting the drivetrain and preventing catastrophic motor burnout when encountering sudden blockages or oversized boulders.

Custom Attachments for Extreme Excavation

To optimize output in compacted terrain, these units often integrate auxiliary performance gear:

  • Side Excavating Cutters: Twin hydraulic reamers or cutter heads bolted to the sides of the pump frame to loosen hard-packed clay, shale, or heavily compacted riverbeds before the slurry enters the intake.
  • Jetting Rings: High-pressure water nozzles positioned around the suction inlet to fluidize densely packed sand layers, significantly boosting solid-to-liquid intake ratios.

HTU-T Hydraulic Submersible Sludge Sand Pump Configuration Engineered for clearing standard silt, loose sand, and high-volume mud extraction.

  • Mechanism: Features dual lateral agitator motors and agitator head assemblies flanking the main suction intake.
  • Fluid Control: Utilizes a dedicated agitator diverter valve alongside the main distribution valve to manage hydraulic oil return and overflow efficiently.
  • Application: Provides maximum agitation radius for open-water sediment removal, ensuring a steady, high-density slurry yield in uncompacted environments.
Hydraulic Submersible Slurry Pump
Hydraulic Submersible Slurry Pump With Side Cutter

HTU-S Hydraulic Submersible Sludge Sand Pump Built for hard-packed strata, sticky clay, and the most demanding dredging conditions.

  • Mechanism: Integrates a heavy-duty side-mounted cutter motor and assembly that feeds aggressively excavated material directly into an extended suction pipe.
  • Application: Operates effectively as a localized cutter suction dredge attachment. The aggressive mechanical cutting action breaks down hardened mud and cohesive clay layers that standard agitators cannot penetrate, fluidizing the material before it enters the primary pump casing.

HTU-L Hydraulic Submersible Sludge Sand Pump Designed for confined space operations where lateral clearance is non-existent.

  • Mechanism: An inline, streamlined design featuring a bottom-mounted cutter (auger) motor and cutter head assembly positioned directly below the strainer bracket.
  • Application: The definitive choice for caisson sinking, steel sheet pile cofferdams, and deep foundation trenching. The vertical profile allows the excavator to plunge the pump into tight cylindrical or rectangular shafts to evacuate drill cuttings and mud without snagging on support structures.
Hydraulic Submersible Slurry Pump With Bottom Cutter

HTU-T Dual Agitator Type Hydraulic Submersible Slurry Pump, HTU-L Bottom Cutter Type Hydraulic Submersible Slurry Pump, and HTU-S Side Reamer Type Hydraulic Submersible Slurry Pump are Engineered for Mud, Sand, and Large Particle Extraction

Our hydraulic submersible slurry pumps are designed to be powered by excavators or hydraulic power packs. Depending on your slurry type and project requirements, we offer most suitable pump model to ensure maximum efficiency and service life.

ConfigurationApplicationMotor/Speed SpecsKey Benefit
Mud & SlurryFine silt, soft mud, industrial waste.4-Pole Motor / 1450 RPMHigh-speed rotation for maximum flow and discharge efficiency.
Sand & AbrasiveRiver sand, tailing sand, mineral suction.6-Pole Motor / 1000 RPMLower speed reduces wear on wet-end parts, extending pump life in abrasive conditions.
Large ParticlesGravel, stones, heavy debris.Custom ConfigurationTailored RPM and internal clearances based on specific particle size and site conditions.

Hydraulic Submersible Gravel Pump Technical Data

Hydraulic Submersible Slurry Pump for Big Solids SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T400-252004002570801602516030
HTU-T500-2020050020708016025160
HTU-T500-302505003090802002520040
HTU-T700-2025070020908020025200
HTU-T600-3025060030110802502725060
HTU-T800-25250800251108025027250
HTU-T1000-183001000181108025027250
Hydraulic Submersible Slurry Structure
No.Part NameMaterial
1Excavator Connecting FrameQ235
2Main Pump Displacement Piston Hydraulic MotorCast Iron
3Main Pump Shaft Sleeve2Cr13
4Main Pump Bearing HousingQ235
5Main Pump Upper BearingGCr4
6Main Pump Pump Shaft40Gr
7Main Pump Lower BearingGCr4
8Lower Bearing Lower Bearing Lock NutA2-70
9Main Pump Bearing CoverHT200
10Main Pump Mechanical SealAlloy
11Main Pump Mechanical Seal CoverQT500
12Main Pump Outer Mechanical CoverAlloy
13Main Pump Inner Protector PlateKMTBCr26
14Main Pump BodyKMTBCr26
15Main Pump ImpellerKMTBCr26
16Main Pump Suction PlateKMTBCr26
17Main Pump Impeller NutKMTBCr26
18Main Pump Agitator ImpellerKMTBCr26
19Main Pump Bracket Filter ScreenQ235
Hydraulic Slurry Pump With Dual Agitators
No.Part NameMaterial
1Agitator Five-Star MotorCast Iron
2Shaft Sleeve2Cr13
3Agitator Upper BearingGCr4
4Agitator Bearing HousingQ235
5Agitator Connection PlateQ235
6Agitator Pump Shaft40Gr
7Agitator BearingGCr4
8Bearing Lock NutA2-70
9Agitator Bearing CoverQT500
10Agitator Mechanical Seal CoverQT500
11Agitator Assembly Connection FlangeQ235
12Lock NutA2-70
13Shaft Head Pressure Sleeve AssemblyA2-70
14Agitator Head AssembltQ235
15Agitator Head Tooth RootWear Resistant Alloy
16Agitator Head Tooth TipWear Resistant Alloy

All wetted components are cast from high-wear-resistant metallurgy to withstand abrasive scouring and corrosive liquid environments.

  • Volute Casing, Impeller, & Agitator: High-Chrome White Iron Alloy (ASTM A532 Class III Type A – A05 / Cr26), hardened to 60 HRC for extreme resistance to abrasive quartz sand and gravel.
  • Corrosive/Marine Environment (Optional): Hyper-chrome alloys (A49, A33) or Duplex Stainless Steel (2205/2507) for handling acidic slurry, mining tailings, and salt-water dredging.
  • Mechanical Shaft Seal: Double mechanical seals operating in an isolated oil bath. Silicon Carbide (SiC) vs. Tungsten Carbide (TC) seal faces prevent slurry ingress into the hydraulic motor housing.
  • Frame & Structural Components: Structural heavy-plate Q350/Q460 steel with protective epoxy-marine coatings.
  • Shaft:40GR
  • Hydraulic Motor & Brackets: The top-mounted motor and adapter frames that drive the pump using fluid power from an excavator or dedicated power pack
Excavator Mounted With Hydraulic Sand Dredge Pump (2)
Electric And Hydraulic Submersible Slurry Pump(1)

The Professional Edge:

As a proven alternative to traditional electric pumps, hydraulic slurry technology is a mature and stable solution. It is the gold standard for projects in harsh environments or remote sites where power infrastructure is limited or non-existent.

Seamless Integration & Mobility

Designed for rapid deployment, the pump mounts directly to the excavator’s arm (replacing the bucket) or can be suspended from a dredging barge. This eliminates the need for complex ground support or fixed installations, simplifying site management and reducing setup time.

Enhanced Safety & Stability

Eliminate the risks associated with electrical systems. Powered entirely by hydraulic drive, these pumps pose zero risk of electric leakage in submerged environments. The system is engineered for high-load capacity and balanced power transmission, significantly extending the service life of internal components.

Engineered for High-Wear Resistance

Maximize your uptime in abrasive conditions. All critical wet-end components—including the pump casing, impeller, wear plates, and agitator—are cast from a premium High-Chrome Wear-Resistant Alloy. This high-grade material ensures stable performance during continuous operation and drastically reduces the frequency of spare part replacements.

Industry-Leading Solid Concentration

Engineered to move more than just water. These units are capable of processing high-density fluids, including mud, sand, sludge, and mortar, with solid concentrations ranging from 50% to 70%.

Maximizing Equipment Utility

Turn your excavator into a multi-purpose dredging tool. When traditional excavation reaches its limits, our hydraulic pump takes over, enabling long-distance transport of materials that would otherwise be unreachable. This adds significant versatility and ROI to your existing machinery fleet.

Amoshydro®Pump’s design allows operators to adjust oil pressure and flow as needed, accommodating different delivery tasks. The hydraulic pump station can be powered by a diesel engine or an electric motor, depending on customer needs and site conditions. Diesel engines offer a self-sufficient solution, ideal for remote areas with limited infrastructure, while electric motors provide a cost-effective and eco-friendly option where stable power is available. The hydraulic pump station can also integrate control functions like pressure regulation and remote monitoring, ensuring safe and efficient pump operation. Although this method requires a significant initial investment for the pump station, it typically results in low long-term operating costs.

The hydraulic pump station drive is a traditional method that requires a dedicated hydraulic pump station for the slurry pump. This station typically includes one or more hydraulic pumps that supply high-pressure oil to the pump’s hydraulic motor through dedicated pipes. This setup ensures stable oil pressure and flow, enabling the slurry pump to operate efficiently under various conditions.

Submersible Dredging Pump With Hydraulic Power Unit
Excavator Mounted Dredging Pump3

The excavator drive connects the hydraulic submersible slurry pump directly to the hydraulic system of the excavator. The excavator’s hydraulic pump supplies power to the slurry pump’s hydraulic motor through hydraulic lines. This method reduces equipment complexity and cost, as it eliminates the need for a separate hydraulic pump station.

Additionally, the mobility of the excavator allows for quick transfers between work sites, enhancing operational flexibility. The excavator’s hydraulic system usually provides sufficient power and flow to handle various complex conveying tasks, making this method particularly suitable for projects that demand rapid movement and frequent changes in working positions.

Excavator Mounted Hydraulic Submersible Dredging Pump (3)
Excavator Mounted Hydraulic Submersible Dredging Pump (4)
Excavator Mounted Hydraulic Submersible Slurry Pump

Dredging & River Desilting: Clearing compacted sand, silt, and sediment from rivers, lakes, reservoirs, harbors, and canals.
Port & Jetty Construction: Excavating soft seabed, underwater trenching, and caisson sinking support.
Industrial Sludge & Sewage Cleanout: Removing heavy sludge, industrial solids, and sticky mud from settling basins or wastewater lagoons.

Space-Restricted & Deep Excavation Projects: Specially engineered for open caissons, steel sheet pile cofferdams and confined working environments where lateral space is severely limited and vertical penetration is required.

Commercial Sand Mining: Direct extraction and transport of construction-grade river, lake, and silica sand.

River & Channel Maintenance: Removing heavy sediment, silt, and gravel accumulations to maintain channel depth.

Mining Tailings Recovery: Pumping high-density mineral slurries, heavy slag, and coal ash from settling ponds.

Land Reclamation & Dewatering: Moving massive volumes of seabed solids for coastal fill and infrastructure projects.

Harbor, Dock & Port Maintenance: Dredging silt, sand, and organic waste around piers, docks, and ship channels without disrupting vessel traffic or requiring large suction dredgers.

Beach Nourishment & Erosion Control: Excavating offshore sand beds and transferring material via pipeline to restore eroded beaches and reinforce seawalls.

Bridge Pier & Subsea Foundation Prep: Clearing soft seabed mud and gravel prior to placing caissons, driving structural piles, or laying underwater utility cables.

Capital Dredging & Marina Cleaning: Expanding water depth in shallow bays, inlets, and private marinas where traditional cutter suction dredgers cannot physically maneuver.
Industrial & Municipal Services: Pumping thick sludge from wastewater treatment settling tanks, steel plant scale pits, and power plant ash ponds.

Excavator Slurry Pump Attachments: Pinning directly onto standard hydraulic excavators (Cat, Komatsu, Volvo, etc.) for rapid deployment in remote or restricted-access job sites.

Construction & Infrastructure Dewatering: Handling heavy bentonite mud in foundation drilling, caisson sinking, and tunneling operations.

Industrial Wastewater & Sludge Ponds: Cleaning settling basins, scale pits in steel mills, and paper mill effluent lagoons without clogging.

Marine Dredging & Port Maintenance: Extensively utilized in river deepening, harbor maintenance, and coastal land reclamation to clear dense sediment build-up.

get your copy of the Amoshydro®Hydraulic submersible slurry pump handbook

Excavator brands

Amoshydro® hydraulic submersible slurry pumps are engineered with a versatile mounting interface, allowing for seamless integration with the hydraulic systems of all major global excavator brands. Whether you operate a standard crawler or a specialized amphibious machine, our pumps are compatible with:

Excavator Brands (2)
Excavator Brands (1)
Excavator Brands (3)
Excavator Brands (4)
Excavator Brands (5)
Excavator Brands (6)
Excavator Brands (7)
Excavator Brands (8)
Excavator Brands (9)
Excavator Brands (10)
Excavator Brands (11)
Excavator Brands (12)

FAQ

Yes. Unlike electric submersible pumps that rely on the pumped liquid to cool the motor stator, the Amoshydro® hydraulic motor is continuously cooled and lubricated by circulating hydraulic fluid. The unit can run dry under “snore” conditions (intermittent air/water draw) indefinitely without thermal shutdown, motor coil burnout, or seal damage.

Impeller & Wear Plates: Precision-cast from High-Chrome Alloy (Cr26 / A05 metallurgy) with a hardness rating of ge 58HRC to resist sliding abrasion from silica sand and gravel.Pump Casing: Heavy-walled ductile iron (QT450-10) engineered to absorb high impact from particulate solids and hydraulic shock loads.

Power Source & Safety: A hydraulic gravel pump is driven by a surface-mounted hydraulic power pack (diesel or electric-hydraulic) rather than direct grid electricity. This eliminates electrical shock hazards in deep water, marine environments, or remote job sites.

Torque Profile: Hydraulic motors provide exceptional starting torque and can stall under heavy jam conditions without burning out, whereas electric motors risk winding burnout if overloaded by heavy gravel blocks.

Yes. Unlike standard sewage or clear-water pumps, heavy-duty gravel pumps feature wide internal passages, open or semi-open impellers, and oversized volute casings designed to pass large solids—typically ranging from 50 mm up to over 120–200 mm, depending on the pump size and suction inlet dimensions.

No. Because the pump body and intake are designed to be fully submerged directly into the medium (mud, sand, or gravel bed), suction lift limitations are entirely eliminated. The pump is inherently self-priming the moment it enters the fluid.

To withstand the severe erosive nature of quartz sand, sharp pebbles, and slag, all core wetted components—including the impeller, suction casing, and wear plates—are manufactured from high-chromium alloys (often hardness ratings of HRC 58) or specialized hardened composite materials.

These robust pumps are heavily deployed across marine dredging (harbor deepening, coastal reclamation), alluvial mining (gold, diamond, and sand/aggregate extraction), construction engineering (caisson sinking, bentonite management), and industrial tailings disposal (settling pond clearance, slag handling).

Compare Products

Primary Applications
Mining, Dredging
-
Agitator Structure
Standard Bottom Single Agitator
-
Space Requirements
Compact design
-
Number of Hydraulic Motors
Single Motor
-

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message