Hydraulic Submersible Dredge Pump with Diesel Power Pack

Amoshydro® Hydraulic Submersible Dredge Pump with Diesel Power Pack is an industrial-grade, heavy-duty pumping solution engineered specifically for handling high-density, abrasive slurries, river sand extraction, marine dredging, and industrial waste cleanup. Unlike conventional electric submersible pumps, this system relies on a closed-loop hydraulic drive, removing electrical hazards when working deep underwater or in explosive marine environments. Paired with an independent, diesel-driven Hydraulic Power Unit (HPU), the equipment offers full operational autonomy on remote job sites without grid power.
Configure for a perfect match. Fill out our technical sizing guide to ensure seamless excavator integration

Amoshydro® Hydraulic Submersible Dredge Pump with Diesel Power Pack is an industrial-grade, heavy-duty pumping solution engineered specifically for handling high-density, abrasive slurries, river sand extraction, marine dredging, and industrial waste cleanup.

Unlike conventional electric submersible pumps, this system relies on a closed-loop hydraulic drive, removing electrical hazards when working deep underwater or in explosive marine environments. Paired with an independent, diesel-driven Hydraulic Power Unit (HPU), the equipment offers full operational autonomy on remote job sites without grid power.

组合图
  • Discharge Size:2inch to 16 inch (50 mm to 400 mm)
  • Flow Rate (Capacity):100 to 2,500 m³/h
  • Delivery Head:10 to 60 meters
  • Max. Solid Passage:Up to 60 mm (2.36 inches)
  • Slurry Density Handling:Up to 70% solids by weight / 1.6 kg/dm³
  • Operating Hydraulic Pressure:200 – 320 bar (20 – 32 MPa)
  • Hydraulic Flow Requirement:80 – 350 L/min
  • Diesel Power Pack Rating:30 kW – 450 kW (Tier 3 / Tier 4 Final / Stage V)
  • Working Depth:Up to 50+ meters (unaffected by motor submergence limits)

The pump utilizes a high-torque bent-axis axial piston hydraulic motor or radial piston motor integrated directly into the pump casing.

  • Variable Speed Control: Pump RPM and flow rates are continuously adjustable by regulating the hydraulic oil flow rate via the power pack’s proportional valves.
  • Diesel Engine Integration: Powered by industrial diesel engines (such as Cummins, Perkins, or Caterpillar) equipped with electronic governors, automatic shutdown protections (low oil pressure, high coolant temperature), and large-capacity fuel tanks for 12–24 hours of continuous operation.
  • Power Pack Features: Built with an integrated hydraulic oil reservoir, high-efficiency oil-air heat exchangers for continuous heavy-duty cycles, pressure relief valves, and multi-stage fluid filtration systems to prevent contamination.
  • Dual Operation Flexibility: Besides running on the standalone Diesel HPU, the dredge pump can be directly plumbed into the auxiliary hydraulic circuits of heavy excavators, turning standard excavators into amphibious dredging units.

HTU-T Hydraulic Submersible Sand and Tailings Pump with dual agitators Configuration Engineered for clearing standard silt, loose sand, and high-volume mud extraction.

  • Mechanism: Features dual lateral agitator motors and agitator head assemblies flanking the main suction intake.
  • Fluid Control: Utilizes a dedicated agitator diverter valve alongside the main distribution valve to manage hydraulic oil return and overflow efficiently.
  • Application: Provides maximum agitation radius for open-water sediment removal, ensuring a steady, high-density slurry yield in uncompacted environments.
Hydraulic Submersible Slurry Pump
Hydraulic Submersible Slurry Pump With Side Cutter

HTU-S Hydraulic Submersible Sand and Tailings Pump with side cutters Built for hard-packed strata, sticky clay, and the most demanding dredging conditions.

  • Mechanism: Integrates a heavy-duty side-mounted cutter motor and assembly that feeds aggressively excavated material directly into an extended suction pipe.
  • Application: Operates effectively as a localized cutter suction dredge attachment. The aggressive mechanical cutting action breaks down hardened mud and cohesive clay layers that standard agitators cannot penetrate, fluidizing the material before it enters the primary pump casing.

HTU-L Hydraulic Submersible Sand and Tailings Pump with Bottom-Cutter Designed for confined space operations where lateral clearance is non-existent.

  • Mechanism: An inline, streamlined design featuring a bottom-mounted cutter (auger) motor and cutter head assembly positioned directly below the strainer bracket.
  • Application: The definitive choice for caisson sinking, steel sheet pile cofferdams, and deep foundation trenching. The vertical profile allows the excavator to plunge the pump into tight cylindrical or rectangular shafts to evacuate drill cuttings and mud without snagging on support structures.
Hydraulic Submersible Slurry Pump With Bottom Cutter

All wetted components are cast from high-wear-resistant metallurgy to withstand abrasive scouring and corrosive liquid environments.

  • Volute Casing, Impeller, & Agitator: High-Chrome White Iron Alloy (ASTM A532 Class III Type A – A05 / Cr26), hardened to 60 HRC for extreme resistance to abrasive quartz sand and gravel.
  • Corrosive/Marine Environment (Optional): Hyper-chrome alloys (A49, A33) or Duplex Stainless Steel (2205/2507) for handling acidic slurry, mining tailings, and salt-water dredging.
  • Mechanical Shaft Seal: Double mechanical seals operating in an isolated oil bath. Silicon Carbide (SiC) vs. Tungsten Carbide (TC) seal faces prevent slurry ingress into the hydraulic motor housing.
  • Frame & Structural Components: Structural heavy-plate Q350/Q460 steel with protective epoxy-marine coatings.
Hydraulic Submersible Slurry Pump Parts
Hydraulic Power Packing

Sand & Gravel Extraction: Riverbed sand mining, ocean sand pumping, and aggregate reclamation.

Harbor & Port Dredging: Maintenance dredging of docks, harbors, marinas, and shipping lanes to remove silt accumulation.

Mining Tailings Management: Pumping high-density sludge, tailing pond cleanup, and copper/gold slurry transfer.

Industrial & Municipal Sludge: Removing settled sludge from municipal wastewater lagoons, refinery API separators, and settling ponds.

Civil Engineering & Infrastructure: Caisson sinking, bridge pier foundation excavation, and cofferdam dewatering.

get your copy of the Amoshydro®Hydraulic submersible slurry pump handbook

Excavator brands

Amoshydro® hydraulic submersible slurry pumps are engineered with a versatile mounting interface, allowing for seamless integration with the hydraulic systems of all major global excavator brands. Whether you operate a standard crawler or a specialized amphibious machine, our pumps are compatible with:

Excavator Brands (2)
Excavator Brands (1)
Excavator Brands (3)
Excavator Brands (4)
Excavator Brands (5)
Excavator Brands (6)
Excavator Brands (7)
Excavator Brands (8)
Excavator Brands (9)
Excavator Brands (10)
Excavator Brands (11)
Excavator Brands (12)

FAQ

Hydraulic drives deliver immediate high startup torque to break through stalled impellers that trip electric motor breakers. They eliminate shock hazards in saltwater or deep water, have a higher power-to-weight ratio for arm mounting, and allow instant pump speed control by adjusting hydraulic oil flow without expensive VFDs.

For consolidated sediment, the pump pairs with hydraulic side cutters or a high-pressure water jetting ring. Side cutters physically break down compacted clay banks, while jetting nozzles shear hard-packed sand into suspension ahead of the pump inlet

Impellers, volutes, agitators, and wear plates are cast in 28% High-Chrome alloy (60–65 HRC) to withstand silica sand, slurry abrasion, and ore tailings. Replaceable wear liners protect structural housings, and external adjustment screws let operators reset impeller clearances as wear occurs without dismantling the pump.

Yes. Standard models handle slurry temperatures up to 176°F (80°C). For acid mine drainage, chemical sludge, or corrosive industrial waste, pumps can be fitted with specialized Viton seal kits and duplex stainless steel or custom alloy wet-end options.

Compare Products

Primary Applications
Mining, Dredging
-
Agitator Structure
Standard Bottom Single Agitator
-
Space Requirements
Compact design
-
Number of Hydraulic Motors
Single Motor
-

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message