Hydraulic Excavator Submersible Canals Dredging Pump

Specification Parameter
Discharge Size:100 mm – 400 mm (4" – 16")
Flow Capacity:100 – 2,000 m³/h
Head Range:15 – 65 m
Max. Solid Concentration:Up to 60% by weight / 30% by volume
Drive Compatibility:Excavator hydraulic circuit or standalone HPU (150–350 bar)
Material Standard:High-Chrome Alloy (27% Cr / A05)
Mechanical Seal:Double Silicon Carbide Mechanical Seal
Configure for a perfect match. Fill out our technical sizing guide to ensure seamless excavator integration
Gemini Generated Image Oa28kpoa28kpoa28
Excavator Mounted Hydraulic Dredging Pump (2)

Amoshydro®ydraulic excavator submersible canals dredging pump is engineered specifically for waterway restoration, combining the mobility of a standard excavator with the brute force of a heavy duty hydraulic sludge pump. By mounting directly onto excavator booms, this excavator attachment dredging pump eliminates the bottlenecks of land-based vacuum trucks and cumbersome floating dredge barges.

Engineered for Canal Desilting and Waterway Rehabilitation

Restoring silted-up canals and drainage ditches demands a machine that can handle sticky clay, organic sludge, and embedded sand without clogging. As a specialized hydraulic submersible slurry pump for excavator deployment, the HTU unit plunges directly into the sediment.

Unlike self-priming pumps restricted by atmospheric suction limits, this hydraulic driven submersible mud pump operates entirely underwater. By placing the centrifugal pump wet end at the point of excavation, the system maintains high volumetric efficiency even when pumping high-viscosity sludge at extended discharge distances.

Amoshydro®Hydraulic Excavator Submersible Canals Dredging Pump are also named Hydraulic excavator submersible mud dredging pump, Hydraulic excavator sand dredging pump,Hydraulic submersible solids handling pumps,Hydraulic submersible mud pump,Hydraulic submersible sand sludge pump,Hydraulic submersible agitator pump,Hydraulic submersible slurry pump,excavator boom mounted dredge pump,hydraulic submersible silt removal pump,hydraulic submersible bentonite pump etc.

Clog-Free Open Impeller Geometry

Designed specifically for high-viscosity and high-solids media, the semi-open, non-clog impeller features wide internal clearances. It easily passes large stones, gravel, fibrous silt, and trash debris without clogging or binding, maintaining uninterrupted volumetric efficiency.

Extreme Abrasion Resistance (High-Chrome Metallurgy)

All wet-end components—including the volute casing, impeller, and suction plate—are cast from proprietary high-chromium alloy (27% Cr). Heat-treated to a hardness exceeding 60 HRC, these components resist micro-cutting, gouging, and erosive wear from sharp sand, mine tailings, and mortar.

Integrated Mechanical Agitators & Cutters

To pump settled or compacted material, the Amoshydro® pump features optional mechanical side cutters or bottom agitators. These high-torque cutter heads break up hardened clay and sand beds, fluidizing the material into a homogeneous slurry before suction.

Heavy-Duty Hydraulic Motor & Double Mechanical Seals

Powered by a high-torque quantitative hydraulic plunger motor, the pump operates smoothly under variable hydraulic pressures. A Double -seal oil chamber with tungsten carbide mechanical faces insulates the motor from slurry ingress, ensuring multi-season operational reliability even in deep submersion.

Seamless Excavator Integration

Powered directly through the excavator auxiliary hydraulic line for slurry pump, the unit utilizes the host machine’s existing hydraulic circuit for variable speed control and instant power response.

Quick Plug-and-Play Excavator Mounting

Equipped with customized mounting brackets, the pump mounts directly to the bucket arm of major excavator brands (CAT, Komatsu, Volvo, Hitachi, Sany, etc.). Setup takes less than an hour using standard hydraulic auxiliary lines.

HTU-T Hydraulic Excavator Submersible Canals Dredging Pump Configuration Engineered for clearing standard silt, loose sand, and high-volume mud extraction.

  • Mechanism: Features dual lateral agitator motors and agitator head assemblies flanking the main suction intake.
  • Fluid Control: Utilizes a dedicated agitator diverter valve alongside the main distribution valve to manage hydraulic oil return and overflow efficiently.
  • Application: Provides maximum agitation radius for open-water sediment removal, ensuring a steady, high-density slurry yield in uncompacted environments.
Hydraulic Submersible Slurry Pump
Hydraulic Submersible Slurry Pump With Side Cutter

HTU-S Hydraulic Excavator Submersible Canals Dredging Pump Built for hard-packed strata, sticky clay, and the most demanding dredging conditions.

  • Mechanism: Integrates a heavy-duty side-mounted cutter motor and assembly that feeds aggressively excavated material directly into an extended suction pipe.
  • Application: Operates effectively as a localized cutter suction dredge attachment. The aggressive mechanical cutting action breaks down hardened mud and cohesive clay layers that standard agitators cannot penetrate, fluidizing the material before it enters the primary pump casing.

HTU-L Hydraulic Excavator Submersible Canals Dredging Pump Designed for confined space operations where lateral clearance is non-existent.

  • Mechanism: An inline, streamlined design featuring a bottom-mounted cutter (auger) motor and cutter head assembly positioned directly below the strainer bracket.
  • Application: The definitive choice for caisson sinking, steel sheet pile cofferdams, and deep foundation trenching. The vertical profile allows the excavator to plunge the pump into tight cylindrical or rectangular shafts to evacuate drill cuttings and mud without snagging on support structures.
Hydraulic Submersible Slurry Pump With Bottom Cutter

HTU-T Dual Agitator Type Hydraulic Submersible Slurry Pump, HTU-L Bottom Cutter Type Hydraulic Submersible Slurry Pump, and HTU-S Side Reamer Type Hydraulic Submersible Slurry Pump are Engineered for Mud, Sand, and Large Particle Extraction

Our hydraulic submersible slurry pumps are designed to be powered by excavators or hydraulic power packs. Depending on your slurry type and project requirements, we offer most suitable pump model to ensure maximum efficiency and service life.

ConfigurationApplicationMotor/Speed SpecsKey Benefit
Mud & SlurryFine silt, soft mud, industrial waste.4-Pole Motor / 1450 RPMHigh-speed rotation for maximum flow and discharge efficiency.
Sand & AbrasiveRiver sand, tailing sand, mineral suction.6-Pole Motor / 1000 RPMLower speed reduces wear on wet-end parts, extending pump life in abrasive conditions.
Large ParticlesGravel, stones, heavy debris.Custom ConfigurationTailored RPM and internal clearances based on specific particle size and site conditions.

Hydraulic Excavator Submersible Canals Dredging Pump Technical Data

Hydraulic Submersible Slurry Pump for Mud SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T50-308050301510001328224213
HTU-T100-201001002015100020
HTU-T150-15100/1501501515100020
HTU-T50-508050502510001345256820
HTU-T100-301001003025100020
HTU-T150-221501502225100030
HTU-T200-181502001825100030
HTU-T150-301501503030100030552583
HTU-T200-251502002530100030
HTU-T300-151503001530100030
HTU-T150-5015015050451000308025120
HTU-T200-352002003545100045
HTU-T300-252003002545100045
HTU-T400-202004002045100045
HTU-T200-5515020055651000301072516030
HTU-T300-352003003565100050
HTU-T500-202005002065100050
HTU-T250-5515025055751000301252519040
HTU-T400-302004003075100055
HTU-T500-252005002575100055
HTU-T600-202006002075100055
HTU-T280-6015028060951000301602524060
HTU-T500-302005003095100055
HTU-T600-252006002595100055
HTU-T350-702003507012010003020027300Dual-Pump Confluence 40
HTU-T400-5020040050120100055
HTU-T500-4020050040120100055
HTU-T700-3020070030120100055
HTU-T800-252508002512010007026060
HTU-T400-702004007014510005525027380Dual-Pump Confluence 40
HTU-T500-5020050050145100055
HTU-T700-3520070035145100055
HTU-T800-3025080030145100070330
Hydraulic Submersible Slurry Structure
No.Part NameMaterial
1Excavator Connecting FrameQ235
2Main Pump Displacement Piston Hydraulic MotorCast Iron
3Main Pump Shaft Sleeve2Cr13
4Main Pump Bearing HousingQ235
5Main Pump Upper BearingGCr4
6Main Pump Pump Shaft40Gr
7Main Pump Lower BearingGCr4
8Lower Bearing Lower Bearing Lock NutA2-70
9Main Pump Bearing CoverHT200
10Main Pump Mechanical SealAlloy
11Main Pump Mechanical Seal CoverQT500
12Main Pump Outer Mechanical CoverAlloy
13Main Pump Inner Protector PlateKMTBCr26
14Main Pump BodyKMTBCr26
15Main Pump ImpellerKMTBCr26
16Main Pump Suction PlateKMTBCr26
17Main Pump Impeller NutKMTBCr26
18Main Pump Agitator ImpellerKMTBCr26
19Main Pump Bracket Filter ScreenQ235
Hydraulic Slurry Pump With Dual Agitators
No.Part NameMaterial
1Agitator Five-Star MotorCast Iron
2Shaft Sleeve2Cr13
3Agitator Upper BearingGCr4
4Agitator Bearing HousingQ235
5Agitator Connection PlateQ235
6Agitator Pump Shaft40Gr
7Agitator BearingGCr4
8Bearing Lock NutA2-70
9Agitator Bearing CoverQT500
10Agitator Mechanical Seal CoverQT500
11Agitator Assembly Connection FlangeQ235
12Lock NutA2-70
13Shaft Head Pressure Sleeve AssemblyA2-70
14Agitator Head AssembltQ235
15Agitator Head Tooth RootWear Resistant Alloy
16Agitator Head Tooth TipWear Resistant Alloy

All wetted components are cast from high-wear-resistant metallurgy to withstand abrasive scouring and corrosive liquid environments.

  • Volute Casing, Impeller, & Agitator: High-Chrome White Iron Alloy (ASTM A532 Class III Type A – A05 / Cr26), hardened to 60 HRC for extreme resistance to abrasive quartz sand and gravel.
  • Corrosive/Marine Environment (Optional): Hyper-chrome alloys (A49, A33) or Duplex Stainless Steel (2205/2507) for handling acidic slurry, mining tailings, and salt-water dredging.
  • Mechanical Shaft Seal: Double mechanical seals operating in an isolated oil bath. Silicon Carbide (SiC) vs. Tungsten Carbide (TC) seal faces prevent slurry ingress into the hydraulic motor housing.
  • Frame & Structural Components: Structural heavy-plate Q350/Q460 steel with protective epoxy-marine coatings.
  • Shaft:40GR
  • Hydraulic Motor & Brackets: The top-mounted motor and adapter frames that drive the pump using fluid power from an excavator or dedicated power pack
Excavator Mounted With Hydraulic Sand Dredge Pump (2)
Electric And Hydraulic Submersible Slurry Pump(1)

The Professional Edge:

As a proven alternative to traditional electric pumps, hydraulic slurry technology is a mature and stable solution. It is the gold standard for projects in harsh environments or remote sites where power infrastructure is limited or non-existent.

Seamless Integration & Mobility

Designed for rapid deployment, the pump mounts directly to the excavator’s arm (replacing the bucket) or can be suspended from a dredging barge. This eliminates the need for complex ground support or fixed installations, simplifying site management and reducing setup time.

Enhanced Safety & Stability

Eliminate the risks associated with electrical systems. Powered entirely by hydraulic drive, these pumps pose zero risk of electric leakage in submerged environments. The system is engineered for high-load capacity and balanced power transmission, significantly extending the service life of internal components.

Engineered for High-Wear Resistance

Maximize your uptime in abrasive conditions. All critical wet-end components—including the pump casing, impeller, wear plates, and agitator—are cast from a premium High-Chrome Wear-Resistant Alloy. This high-grade material ensures stable performance during continuous operation and drastically reduces the frequency of spare part replacements.

Industry-Leading Solid Concentration

Engineered to move more than just water. These units are capable of processing high-density fluids, including mud, sand, sludge, and mortar, with solid concentrations ranging from 50% to 70%.

Maximizing Equipment Utility

Turn your excavator into a multi-purpose dredging tool. When traditional excavation reaches its limits, our hydraulic pump takes over, enabling long-distance transport of materials that would otherwise be unreachable. This adds significant versatility and ROI to your existing machinery fleet.

Amoshydro®Pump’s design allows operators to adjust oil pressure and flow as needed, accommodating different delivery tasks. The hydraulic pump station can be powered by a diesel engine or an electric motor, depending on customer needs and site conditions. Diesel engines offer a self-sufficient solution, ideal for remote areas with limited infrastructure, while electric motors provide a cost-effective and eco-friendly option where stable power is available. The hydraulic pump station can also integrate control functions like pressure regulation and remote monitoring, ensuring safe and efficient pump operation. Although this method requires a significant initial investment for the pump station, it typically results in low long-term operating costs.

The hydraulic pump station drive is a traditional method that requires a dedicated hydraulic pump station for the slurry pump. This station typically includes one or more hydraulic pumps that supply high-pressure oil to the pump’s hydraulic motor through dedicated pipes. This setup ensures stable oil pressure and flow, enabling the slurry pump to operate efficiently under various conditions.

Submersible Dredging Pump With Hydraulic Power Unit
Excavator Mounted Dredging Pump3

The excavator drive connects the hydraulic submersible slurry pump directly to the hydraulic system of the excavator. The excavator’s hydraulic pump supplies power to the slurry pump’s hydraulic motor through hydraulic lines. This method reduces equipment complexity and cost, as it eliminates the need for a separate hydraulic pump station.

Additionally, the mobility of the excavator allows for quick transfers between work sites, enhancing operational flexibility. The excavator’s hydraulic system usually provides sufficient power and flow to handle various complex conveying tasks, making this method particularly suitable for projects that demand rapid movement and frequent changes in working positions.

Dredging & River Desilting: Clearing compacted sand, silt, and sediment from rivers, lakes, reservoirs, harbors, and canals.
Port & Jetty Construction: Excavating soft seabed, underwater trenching, and caisson sinking support.
Industrial Sludge & Sewage Cleanout: Removing heavy sludge, industrial solids, and sticky mud from settling basins or wastewater lagoons.

Space-Restricted & Deep Excavation Projects: Specially engineered for open caissons, steel sheet pile cofferdams and confined working environments where lateral space is severely limited and vertical penetration is required.

Commercial Sand Mining: Direct extraction and transport of construction-grade river, lake, and silica sand.

River & Channel Maintenance: Removing heavy sediment, silt, and gravel accumulations to maintain channel depth.

Mining Tailings Recovery: Pumping high-density mineral slurries, heavy slag, and coal ash from settling ponds.

Land Reclamation & Dewatering: Moving massive volumes of seabed solids for coastal fill and infrastructure projects.

Harbor, Dock & Port Maintenance: Dredging silt, sand, and organic waste around piers, docks, and ship channels without disrupting vessel traffic or requiring large suction dredgers.

Beach Nourishment & Erosion Control: Excavating offshore sand beds and transferring material via pipeline to restore eroded beaches and reinforce seawalls.

Bridge Pier & Subsea Foundation Prep: Clearing soft seabed mud and gravel prior to placing caissons, driving structural piles, or laying underwater utility cables.

Capital Dredging & Marina Cleaning: Expanding water depth in shallow bays, inlets, and private marinas where traditional cutter suction dredgers cannot physically maneuver.
Industrial & Municipal Services: Pumping thick sludge from wastewater treatment settling tanks, steel plant scale pits, and power plant ash ponds.

Excavator Slurry Pump Attachments: Pinning directly onto standard hydraulic excavators (Cat, Komatsu, Volvo, etc.) for rapid deployment in remote or restricted-access job sites.

Construction & Infrastructure Dewatering: Handling heavy bentonite mud in foundation drilling, caisson sinking, and tunneling operations.

Industrial Wastewater & Sludge Ponds: Cleaning settling basins, scale pits in steel mills, and paper mill effluent lagoons without clogging.

Excavator Mounted Hydraulic Submersible Dredging Pump (3)
Excavator Mounted Hydraulic Submersible Dredging Pump (4)
Excavator Mounted Hydraulic Submersible Slurry Pump

get your copy of the Amoshydro®Hydraulic submersible slurry pump handbook

Excavator brands

Amoshydro® hydraulic submersible slurry pumps are engineered with a versatile mounting interface, allowing for seamless integration with the hydraulic systems of all major global excavator brands. Whether you operate a standard crawler or a specialized amphibious machine, our pumps are compatible with:

Excavator Brands (2)
Excavator Brands (1)
Excavator Brands (3)
Excavator Brands (4)
Excavator Brands (5)
Excavator Brands (6)
Excavator Brands (7)
Excavator Brands (8)
Excavator Brands (9)
Excavator Brands (10)
Excavator Brands (11)
Excavator Brands (12)

FAQ

Yes. Unlike electric submersible pumps that rely on the pumped liquid to cool the motor stator, the Amoshydro® hydraulic motor is continuously cooled and lubricated by circulating hydraulic fluid. The unit can run dry under “snore” conditions (intermittent air/water draw) indefinitely without thermal shutdown, motor coil burnout, or seal damage.

Impeller & Wear Plates: Precision-cast from High-Chrome Alloy (Cr26 / A05 metallurgy) with a hardness rating of ge 58HRC to resist sliding abrasion from silica sand and gravel.Pump Casing: Heavy-walled ductile iron (QT450-10) engineered to absorb high impact from particulate solids and hydraulic shock loads.

The drive shaft is protected by a dual mechanical seal system featuring silicon carbide vs. silicon carbide ($\text{SiC/SiC}$) sealing faces. The seals are housed in an isolated, pressure-compensated oil bath chamber that balances internal pressure against external hydrostatic water pressure, preventing slurry intrusion even at extended operating depths.

The mechanical drive assembly features a dual mechanical shaft seal housed within an oil-lubricated barrier chamber. This design keeps seawater and abrasive particles away from the motor bearings and shaft, even when operating at submerged depths where water ambient pressure is high. Additionally, external surfaces are treated with multi-coat marine-grade epoxy paint systems.

Freshwater Flush: Immediately following operations in thick mud, bentonite, or saline environments, submerge the pump in a clean water basin and run it at low hydraulic flow for 3 to 5 minutes to flush internal sediment and prevent mud calcification inside the casing.

Hose Storage: Cap the quick-disconnect hydraulic fittings immediately upon detachment to prevent airborne dirt and moisture from entering the hydraulic motor circuit.

Compare Products

Primary Applications
Mining, Dredging
-
Agitator Structure
Standard Bottom Single Agitator
-
Space Requirements
Compact design
-
Number of Hydraulic Motors
Single Motor
-

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message