Hydraulic Canal Desilting Pump Attachment

Specification Parameter
Discharge Size:100 mm – 400 mm (4" – 16")
Flow Capacity:100 – 2,000 m³/h
Head Range:15 – 65 m
Max. Solid Concentration:Up to 60% by weight / 30% by volume
Drive Compatibility:Excavator hydraulic circuit or standalone HPU (150–350 bar)
Material Standard:High-Chrome Alloy (27% Cr / A05)
Mechanical Seal:Double Silicon Carbide Mechanical Seal
Configure for a perfect match. Fill out our technical sizing guide to ensure seamless excavator integration
Excavator Mounted Submersible Dredging Pump (1)

Hydraulic Canal Desilting Pump Attachment (commonly referred to as an excavator dredge pump or hydraulic slurry pump attachment) is a specialized, high-performance tool designed to mount onto standard hydraulic excavators. It transforms a conventional earth-moving machine into a mobile, high-capacity dredging and sediment-removal system.

Specifically engineered for water infrastructure maintenance, these attachments are indispensable for clearing accumulated silt, sand, organic sludge, and debris from irrigation canals, drainage channels, rivers, and ponds.

The attachment pins directly into the excavator’s existing bucket linkage and is typically powered by the excavator’s auxiliary hydraulic circuit or a dedicated standalone Hydraulic Power Unit (HPU).

  • Agitation: Before suction, optional mechanical cutterheads, auger heads, or high-pressure water jetting rings break up compacted sediment, clay, or debris.
  • Pumping: A heavy-duty, non-clog slurry pump draws in the solid-liquid mixture.
  • Discharge: The material is transformed into a high-density slurry and forced through a heavy-duty discharge hose, pumping it over long distances to settling ponds or designated containment areas away from the waterway.
  • Continuous, High-Efficiency Operation: Unlike traditional excavator buckets that require repetitive scoop-and-dump cycles—causing massive water turbidity and slow production—pump attachments provide a continuous, uniform flow of material.
  • High Solids Handling & Non-Clog Design: Modern attachments can efficiently process slurries with 40% to 70% solids by weight, capable of passing large debris, rocks, and organic objects without plugging internal components.
  • Modular Agitation Options:
    • Cutterheads for heavy, compacted clay and hard-packed sediment.
    • Water Jetting Rings for loosening softer silt and preventing liner damage in engineered or geomembrane-lined canals.
    • Auger Heads for precise horizontal cleanup.
  • Extended Reach and Flexibility: When paired with long-reach excavator booms, operators can dredge deep channels and clean the centers of waterways directly from the bank, eliminating the need to float expensive barge systems.
  • Long-Distance Discharge Capability: Driven by robust hydraulic motors and high-head pump designs, the slurry can be pushed thousands of feet through pipelines to disposal sites without immediate need for booster pumps.

Slurry Specific Gravity & Density: Calculate the Specific Gravity (SG) of your tailing slurry. High SG (above 1.4) requires high-torque hydraulic motors and heavy-duty wear components.

Excavator Hydraulic Flow & Pressure: Ensure your excavator’s auxiliary hydraulic circuit matches the attachment’s continuous GPM and PSI requirements.

Discharge Distance & Pipe Friction: Long discharge lines (over 1,000 feet) require high total dynamic head (TDH) performance or inline booster pumps to prevent pipeline settling and blockages.

Material Abrasiveness & pH: Acidic or highly corrosive mining tailings (e.g., gold leaching residue or coal tailings) require specialized stainless steel alloys, duplex steels, or custom elastomeric coatings.

HTU-T Hydraulic Canal Desilting Pump Attachment Configuration Engineered for clearing standard silt, loose sand, and high-volume mud extraction.

  • Mechanism: Features dual lateral agitator motors and agitator head assemblies flanking the main suction intake.
  • Fluid Control: Utilizes a dedicated agitator diverter valve alongside the main distribution valve to manage hydraulic oil return and overflow efficiently.
  • Application: Provides maximum agitation radius for open-water sediment removal, ensuring a steady, high-density slurry yield in uncompacted environments.
Hydraulic Submersible Slurry Pump
Hydraulic Submersible Slurry Pump With Side Cutter

HTU-S Hydraulic Canal Desilting Pump Attachment Built for hard-packed strata, sticky clay, and the most demanding dredging conditions.

  • Mechanism: Integrates a heavy-duty side-mounted cutter motor and assembly that feeds aggressively excavated material directly into an extended suction pipe.
  • Application: Operates effectively as a localized cutter suction dredge attachment. The aggressive mechanical cutting action breaks down hardened mud and cohesive clay layers that standard agitators cannot penetrate, fluidizing the material before it enters the primary pump casing.

HTU-L Hydraulic Canal Desilting Pump Attachment Designed for confined space operations where lateral clearance is non-existent.

  • Mechanism: An inline, streamlined design featuring a bottom-mounted cutter (auger) motor and cutter head assembly positioned directly below the strainer bracket.
  • Application: The definitive choice for caisson sinking, steel sheet pile cofferdams, and deep foundation trenching. The vertical profile allows the excavator to plunge the pump into tight cylindrical or rectangular shafts to evacuate drill cuttings and mud without snagging on support structures.
Hydraulic Submersible Slurry Pump With Bottom Cutter

HTU-T Dual Agitator Type Hydraulic Submersible Slurry Pump, HTU-L Bottom Cutter Type Hydraulic Submersible Slurry Pump, and HTU-S Side Reamer Type Hydraulic Submersible Slurry Pump are Engineered for Mud, Sand, and Large Particle Extraction

Our hydraulic submersible slurry pumps are designed to be powered by excavators or hydraulic power packs. Depending on your slurry type and project requirements, we offer most suitable pump model to ensure maximum efficiency and service life.

ConfigurationApplicationMotor/Speed SpecsKey Benefit
Mud & SlurryFine silt, soft mud, industrial waste.4-Pole Motor / 1450 RPMHigh-speed rotation for maximum flow and discharge efficiency.
Sand & AbrasiveRiver sand, tailing sand, mineral suction.6-Pole Motor / 1000 RPMLower speed reduces wear on wet-end parts, extending pump life in abrasive conditions.
Large ParticlesGravel, stones, heavy debris.Custom ConfigurationTailored RPM and internal clearances based on specific particle size and site conditions.

Hydraulic Submersible Slurry Desliting Pump Technical Data

Hydraulic Submersible Pump for Sand SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T100-15150100151110002528253013
HTU-T150-201501502018.5100030452530
HTU-T200-151502001518.5100030452530
HTU-T150-221501502222100030552555
HTU-T200-171502001722100030552555
HTU-T300-102003001022100035552555
HTU-T150-30150150303010002080258020
HTU-T250-201502502030100030802580
HTU-T100-50150100504510002010725110
HTU-T250-30150250304510003510725110
HTU-T400-20200400204510004010725110
HTU-T150-4515015045551000251252513030
HTU-T250-35150250355510004012525130
HTU-T400-25200400255510004012525130
HTU-T500-18200500185510004012525130
HTU-T200-45150200457010002516027160
HTU-T350-35200350357010004016027160
HTU-T450-25200450257010004016027160
HTU-T550-20200550207010004016027160
HTU-T200-6015020060901000302002720040
HTU-T400-40200400409010005020027200
HTU-T500-28200500289010005020027200
HTU-T600-25200600259010005020027200
HTU-T400-50200400501101000352502725060
HTU-T600-302506003011010005025027250
HTU-T800-253008002511010005025027250
HTU-T1000-2030010002011010006025027250
HTU-T500-552005005513210005025027300Dual-Pump Confluence 40
HTU-T800-353008003513210005025027300
HTU-T1000-2330010002313210006025027300
HTU-T650-522006505216010004035527360Dual-Pump Confluence 60
HTU-T1000-3030010003016010005035527360
HTU-T800-553008005522010005050027500Dual-Pump Confluence 80
HTU-T1000-4030010004022010005050027500
HTU-T1250-3535012503522010005550027500
HTU-T1600-3035015003022010005550027500
HTU-T2000-2040020002022010006050027500
HTU-T1200-5030012005028010005071025710Dual-Pump Confluence 100
HTU-T1500-4035015004028010005071025710
HTU-T1500-3535015003528010005571025710
HTU-T1750-3035017503028010005571025710
HTU-T2000-2540020002528010006071025710
HTU-T1500-504001500503151000601000201000Dual-Pump Confluence 120
HTU-T2000-354002000353151000601000201000
Hydraulic Submersible Slurry Pump for Mud SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T50-308050301510001328224213
HTU-T100-201001002015100020
HTU-T150-15100/1501501515100020
HTU-T50-508050502510001345256820
HTU-T100-301001003025100020
HTU-T150-221501502225100030
HTU-T200-181502001825100030
HTU-T150-301501503030100030552583
HTU-T200-251502002530100030
HTU-T300-151503001530100030
HTU-T150-5015015050451000308025120
HTU-T200-352002003545100045
HTU-T300-252003002545100045
HTU-T400-202004002045100045
HTU-T200-5515020055651000301072516030
HTU-T300-352003003565100050
HTU-T500-202005002065100050
HTU-T250-5515025055751000301252519040
HTU-T400-302004003075100055
HTU-T500-252005002575100055
HTU-T600-202006002075100055
HTU-T280-6015028060951000301602524060
HTU-T500-302005003095100055
HTU-T600-252006002595100055
HTU-T350-702003507012010003020027300Dual-Pump Confluence 40
HTU-T400-5020040050120100055
HTU-T500-4020050040120100055
HTU-T700-3020070030120100055
HTU-T800-252508002512010007026060
HTU-T400-702004007014510005525027380Dual-Pump Confluence 40
HTU-T500-5020050050145100055
HTU-T700-3520070035145100055
HTU-T800-3025080030145100070330
Hydraulic Submersible Slurry Pump for Big Solids SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T400-252004002570801602516030
HTU-T500-2020050020708016025160
HTU-T500-302505003090802002520040
HTU-T700-2025070020908020025200
HTU-T600-3025060030110802502725060
HTU-T800-25250800251108025027250
HTU-T1000-183001000181108025027250
Hydraulic Submersible Slurry Structure
No.Part NameMaterial
1Excavator Connecting FrameQ235
2Main Pump Displacement Piston Hydraulic MotorCast Iron
3Main Pump Shaft Sleeve2Cr13
4Main Pump Bearing HousingQ235
5Main Pump Upper BearingGCr4
6Main Pump Pump Shaft40Gr
7Main Pump Lower BearingGCr4
8Lower Bearing Lower Bearing Lock NutA2-70
9Main Pump Bearing CoverHT200
10Main Pump Mechanical SealAlloy
11Main Pump Mechanical Seal CoverQT500
12Main Pump Outer Mechanical CoverAlloy
13Main Pump Inner Protector PlateKMTBCr26
14Main Pump BodyKMTBCr26
15Main Pump ImpellerKMTBCr26
16Main Pump Suction PlateKMTBCr26
17Main Pump Impeller NutKMTBCr26
18Main Pump Agitator ImpellerKMTBCr26
19Main Pump Bracket Filter ScreenQ235

All wetted components are cast from high-wear-resistant metallurgy to withstand abrasive scouring and corrosive liquid environments.

  • Volute Casing, Impeller, & Agitator: High-Chrome White Iron Alloy (ASTM A532 Class III Type A – A05 / Cr26), hardened to 60 HRC for extreme resistance to abrasive quartz sand and gravel.
  • Corrosive/Marine Environment (Optional): Hyper-chrome alloys (A49, A33) or Duplex Stainless Steel (2205/2507) for handling acidic slurry, mining tailings, and salt-water dredging.
  • Mechanical Shaft Seal: Double mechanical seals operating in an isolated oil bath. Silicon Carbide (SiC) vs. Tungsten Carbide (TC) seal faces prevent slurry ingress into the hydraulic motor housing.
  • Frame & Structural Components: Structural heavy-plate Q350/Q460 steel with protective epoxy-marine coatings.
  • Shaft:40GR
  • Hydraulic Motor & Brackets: The top-mounted motor and adapter frames that drive the pump using fluid power from an excavator or dedicated power pack
Excavator Mounted With Hydraulic Sand Dredge Pump (2)
Electric And Hydraulic Submersible Slurry Pump(1)

The Professional Edge:

As a proven alternative to traditional electric pumps, hydraulic slurry technology is a mature and stable solution. It is the gold standard for projects in harsh environments or remote sites where power infrastructure is limited or non-existent.

Seamless Integration & Mobility

Designed for rapid deployment, the pump mounts directly to the excavator’s arm (replacing the bucket) or can be suspended from a dredging barge. This eliminates the need for complex ground support or fixed installations, simplifying site management and reducing setup time.

Enhanced Safety & Stability

Eliminate the risks associated with electrical systems. Powered entirely by hydraulic drive, these pumps pose zero risk of electric leakage in submerged environments. The system is engineered for high-load capacity and balanced power transmission, significantly extending the service life of internal components.

Engineered for High-Wear Resistance

Maximize your uptime in abrasive conditions. All critical wet-end components—including the pump casing, impeller, wear plates, and agitator—are cast from a premium High-Chrome Wear-Resistant Alloy. This high-grade material ensures stable performance during continuous operation and drastically reduces the frequency of spare part replacements.

Industry-Leading Solid Concentration

Engineered to move more than just water. These units are capable of processing high-density fluids, including mud, sand, sludge, and mortar, with solid concentrations ranging from 50% to 70%.

Maximizing Equipment Utility

Turn your excavator into a multi-purpose dredging tool. When traditional excavation reaches its limits, our hydraulic pump takes over, enabling long-distance transport of materials that would otherwise be unreachable. This adds significant versatility and ROI to your existing machinery fleet.

Amoshydro®Pump’s design allows operators to adjust oil pressure and flow as needed, accommodating different delivery tasks. The hydraulic pump station can be powered by a diesel engine or an electric motor, depending on customer needs and site conditions. Diesel engines offer a self-sufficient solution, ideal for remote areas with limited infrastructure, while electric motors provide a cost-effective and eco-friendly option where stable power is available. The hydraulic pump station can also integrate control functions like pressure regulation and remote monitoring, ensuring safe and efficient pump operation. Although this method requires a significant initial investment for the pump station, it typically results in low long-term operating costs.

The hydraulic pump station drive is a traditional method that requires a dedicated hydraulic pump station for the slurry pump. This station typically includes one or more hydraulic pumps that supply high-pressure oil to the pump’s hydraulic motor through dedicated pipes. This setup ensures stable oil pressure and flow, enabling the slurry pump to operate efficiently under various conditions.

Submersible Dredging Pump With Hydraulic Power Unit
Excavator Mounted Dredging Pump3

The excavator drive connects the hydraulic submersible slurry pump directly to the hydraulic system of the excavator. The excavator’s hydraulic pump supplies power to the slurry pump’s hydraulic motor through hydraulic lines. This method reduces equipment complexity and cost, as it eliminates the need for a separate hydraulic pump station.

Additionally, the mobility of the excavator allows for quick transfers between work sites, enhancing operational flexibility. The excavator’s hydraulic system usually provides sufficient power and flow to handle various complex conveying tasks, making this method particularly suitable for projects that demand rapid movement and frequent changes in working positions.

Dredging & River Desilting: Clearing compacted sand, silt, and sediment from rivers, lakes, reservoirs, harbors, and canals.
Port & Jetty Construction: Excavating soft seabed, underwater trenching, and caisson sinking support.
Industrial Sludge & Sewage Cleanout: Removing heavy sludge, industrial solids, and sticky mud from settling basins or wastewater lagoons.

Space-Restricted & Deep Excavation Projects: Specially engineered for open caissons, steel sheet pile cofferdams and confined working environments where lateral space is severely limited and vertical penetration is required.

Commercial Sand Mining: Direct extraction and transport of construction-grade river, lake, and silica sand.

River & Channel Maintenance: Removing heavy sediment, silt, and gravel accumulations to maintain channel depth.

Mining Tailings Recovery: Pumping high-density mineral slurries, heavy slag, and coal ash from settling ponds.

Land Reclamation & Dewatering: Moving massive volumes of seabed solids for coastal fill and infrastructure projects.

Harbor, Dock & Port Maintenance: Dredging silt, sand, and organic waste around piers, docks, and ship channels without disrupting vessel traffic or requiring large suction dredgers.

Beach Nourishment & Erosion Control: Excavating offshore sand beds and transferring material via pipeline to restore eroded beaches and reinforce seawalls.

Bridge Pier & Subsea Foundation Prep: Clearing soft seabed mud and gravel prior to placing caissons, driving structural piles, or laying underwater utility cables.

Capital Dredging & Marina Cleaning: Expanding water depth in shallow bays, inlets, and private marinas where traditional cutter suction dredgers cannot physically maneuver.
Construction & Civil Engineering: Deep caisson desilting, bored pile cleaning, slurry wall excavation, and foundation trench dewatering.
Industrial & Municipal Services: Pumping thick sludge from wastewater treatment settling tanks, steel plant scale pits, and power plant ash ponds.

Gemini Generated Image Oa28kpoa28kpoa28
Excavator Mounted Submersible Dredging Pump With Agitators
Excavator Mounted Hydraulic Submersible Slurry Pump
get your copy of the Amoshydro®Hydraulic submersible slurry pump handbook

Excavator brands

Amoshydro® hydraulic submersible slurry pumps are engineered with a versatile mounting interface, allowing for seamless integration with the hydraulic systems of all major global excavator brands. Whether you operate a standard crawler or a specialized amphibious machine, our pumps are compatible with:

Excavator Brands (2)
Excavator Brands (1)
Excavator Brands (3)
Excavator Brands (4)
Excavator Brands (5)
Excavator Brands (6)
Excavator Brands (7)
Excavator Brands (8)
Excavator Brands (9)
Excavator Brands (10)
Excavator Brands (11)
Excavator Brands (12)

FAQ

A: Most hydraulic desilting pump attachments are designed to be universally compatible with standard excavators ranging from 12 tons to 45 tons, depending on the size and weight of the pump model. Compatibility depends primarily on two factors:

Hydraulic Flow and Pressure: The excavator’s auxiliary hydraulic circuit (third-line/breaker line) must provide sufficient flow (GPM / L/min) and system pressure (PSI / bar) to match the pump motor’s requirement.

Lifting Capacity: The excavator boom and arm must safely support the weight of the pump assembly at maximum working reach.

A: Discharge distance and head (elevation gain) depend on the pump design, impeller size, hydraulic input, and slurry density:

Horizontal Distance: Typically 500 to 3,000+ feet (150 to 1,000+ meters) through a flexible or rigid discharge line without requiring an inline booster pump.

Vertical Head: Standard heavy-duty models can achieve 50 to 150 feet (15 to 45 meters) of total dynamic head.

A: When working in lined or engineered canals, mechanical cutters can potentially damage the bed or geomembrane. In these cases:

High-Pressure Water Jetting Rings are used instead of mechanical cutters to loosen soft silt and mud using water streams without contacting or scraping the liner.

Guide Shoes or Rubber Rollers can be fitted on the pump casing to maintain a safe operating distance from the canal bottom.

Excavator-mounted pumps offer superior mobility, reach, and agitation capability. Unlike stationary pumps or floating dredges that require complex setups, anchored cables, or deep water to float, an excavator pump attachment can be easily maneuvered along tailing pond banks, embankments, and shallow settling basins to target thick, settled sludge directly at the source.

A: Not necessarily. Standard attachments run directly off the excavator’s built-in auxiliary hydraulic system. However, a separate standalone Hydraulic Power Unit (HPU) may be recommended if:

The excavator’s auxiliary line flow is insufficient for maximum pump output.

You are operating with an extended long-reach boom that drops hydraulic pressure significantly over long hose runs.

You are running multiple heavy hydraulic accessories concurrently (e.g., high-power cutterheads plus jetting pumps).

A: Because slurry pumping involves highly abrasive sand and gravel, regular maintenance centers on key wet-end components:
Impeller
Wear Plates / Volute Liners
Agitator Blades / Cutter Teeth
Hydraulic Seals and Shaft Packing

Note: High-quality attachments utilize high-chrome alloy construction (e.g., 27%+ Cr / Hi-Chrome) to significantly extend the wear life of these internal parts.

Compare Products

Primary Applications
Mining, Dredging
-
Agitator Structure
Standard Bottom Single Agitator
-
Space Requirements
Compact design
-
Number of Hydraulic Motors
Single Motor
-

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message