Excavator Submersible Hydraulic Sand Pumps with Agitators

When standard excavator buckets hit their limit in high-density slurry, compacted sand, or deep-water silt, the Amoshydro® Excavator Submersible Hydraulic Sand Pump with Agitator steps in. Designed as a heavy-duty plug-and-play excavator dredge attachment, this hydraulic-driven pump converts standard earthmoving equipment (like CAT, Komatsu, Volvo, or Hitachi excavators) into high-production dredging and sand pumping machines.
Configure for a perfect match. Fill out our technical sizing guide to ensure seamless excavator integration

The primary failure point of standard submersible pumps in dredging applications is clogging or pumping too much water and not enough material. Amoshydro®solves this with an integrated, high-torque mechanical agitator attached directly to the pump shaft.

As the pump operates, the agitator forcefully breaks up compacted soil, settled sludge, and heavy sand beds. It creates a localized vortex, kicking the sediment into a fluid suspension that the impeller can easily capture. This mechanism allows the pump to move high-density slurries with specific gravities that would instantly choke a conventional centrifugal water pump.


Amoshydro® hydraulic submersible slurry pumps are built for abrasive, punishing environments.

  • Hydraulic Motor Integration: Powered directly by the excavator’s auxiliary hydraulic lines (PTO). This eliminates the need for external electrical power generators, providing safe, shock-hazard-free operation in deep water.
  • High-Chrome Alloy Wear Parts: The impeller, casing, and agitator are cast from high-chrome alloy steel (typically 27% chrome). This delivers exceptional abrasion resistance against sharp silica sand, gravel, and crushed rock, significantly extending the maintenance lifecycle.
  • Massive Solids Clearance: Designed with wide internal passages to pass large spherical solids and gravel without jamming.
  • Submersible Sealing Technology: Features heavy-duty mechanical seals isolating the hydraulic motor from the fluid end, allowing the unit to operate fully submerged at significant depths.
  • Optional Side Cutters: For highly compacted clay or hard-packed mud, additional hydraulic side cutters can be bolted onto the pump frame to loosen material before it reaches the main agitator.
Excavator Mounted Dredging Pumps

Hydraulic Submersible Slurry Pump For Big Solids Technical Data

Hydraulic Submersible Slurry Pump for Big Solids SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T400-252004002570801602516030
HTU-T500-2020050020708016025160
HTU-T500-302505003090802002520040
HTU-T700-2025070020908020025200
HTU-T600-3025060030110802502725060
HTU-T800-25250800251108025027250
HTU-T1000-183001000181108025027250

Hydraulic Submersible Slurry Pump For Sand Technical Data

Hydraulic Submersible Pump for Sand SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T100-15150100151110002528253013
HTU-T150-201501502018.5100030452530
HTU-T200-151502001518.5100030452530
HTU-T150-221501502222100030552555
HTU-T200-171502001722100030552555
HTU-T300-102003001022100035552555
HTU-T150-30150150303010002080258020
HTU-T250-201502502030100030802580
HTU-T100-50150100504510002010725110
HTU-T250-30150250304510003510725110
HTU-T400-20200400204510004010725110
HTU-T150-4515015045551000251252513030
HTU-T250-35150250355510004012525130
HTU-T400-25200400255510004012525130
HTU-T500-18200500185510004012525130
HTU-T200-45150200457010002516027160
HTU-T350-35200350357010004016027160
HTU-T450-25200450257010004016027160
HTU-T550-20200550207010004016027160
HTU-T200-6015020060901000302002720040
HTU-T400-40200400409010005020027200
HTU-T500-28200500289010005020027200
HTU-T600-25200600259010005020027200
HTU-T400-50200400501101000352502725060
HTU-T600-302506003011010005025027250
HTU-T800-253008002511010005025027250
HTU-T1000-2030010002011010006025027250
HTU-T500-552005005513210005025027300Dual-Pump Confluence 40
HTU-T800-353008003513210005025027300
HTU-T1000-2330010002313210006025027300
HTU-T650-522006505216010004035527360Dual-Pump Confluence 60
HTU-T1000-3030010003016010005035527360
HTU-T800-553008005522010005050027500Dual-Pump Confluence 80
HTU-T1000-4030010004022010005050027500
HTU-T1250-3535012503522010005550027500
HTU-T1600-3035015003022010005550027500
HTU-T2000-2040020002022010006050027500
HTU-T1200-5030012005028010005071025710Dual-Pump Confluence 100
HTU-T1500-4035015004028010005071025710
HTU-T1500-3535015003528010005571025710
HTU-T1750-3035017503028010005571025710
HTU-T2000-2540020002528010006071025710
HTU-T1500-504001500503151000601000201000Dual-Pump Confluence 120
HTU-T2000-354002000353151000601000201000

Hydraulic Submersible Slurry Pump For Mud Technical Data

Hydraulic Submersible Slurry Pump for Mud SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-T50-308050301510001328224213
HTU-T100-201001002015100020
HTU-T150-15100/1501501515100020
HTU-T50-508050502510001345256820
HTU-T100-301001003025100020
HTU-T150-221501502225100030
HTU-T200-181502001825100030
HTU-T150-301501503030100030552583
HTU-T200-251502002530100030
HTU-T300-151503001530100030
HTU-T150-5015015050451000308025120
HTU-T200-352002003545100045
HTU-T300-252003002545100045
HTU-T400-202004002045100045
HTU-T200-5515020055651000301072516030
HTU-T300-352003003565100050
HTU-T500-202005002065100050
HTU-T250-5515025055751000301252519040
HTU-T400-302004003075100055
HTU-T500-252005002575100055
HTU-T600-202006002075100055
HTU-T280-6015028060951000301602524060
HTU-T500-302005003095100055
HTU-T600-252006002595100055
HTU-T350-702003507012010003020027300Dual-Pump Confluence 40
HTU-T400-5020040050120100055
HTU-T500-4020050040120100055
HTU-T700-3020070030120100055
HTU-T800-252508002512010007026060
HTU-T400-702004007014510005525027380Dual-Pump Confluence 40
HTU-T500-5020050050145100055
HTU-T700-3520070035145100055
HTU-T800-3025080030145100070330

Qh Mud Panel
Qh Big Solids Panel

Hydraulic Submersible Slurry Structure
No.Part NameMaterial
1Excavator Connecting FrameQ235
2Main Pump Displacement Piston Hydraulic MotorCast Iron
3Main Pump Shaft Sleeve2Cr13
4Main Pump Bearing HousingQ235
5Main Pump Upper BearingGCr4
6Main Pump Pump Shaft40Gr
7Main Pump Lower BearingGCr4
8Lower Bearing Lower Bearing Lock NutA2-70
9Main Pump Bearing CoverHT200
10Main Pump Mechanical SealAlloy
11Main Pump Mechanical Seal CoverQT500
12Main Pump Outer Mechanical CoverAlloy
13Main Pump Inner Protector PlateKMTBCr26
14Main Pump BodyKMTBCr26
15Main Pump ImpellerKMTBCr26
16Main Pump Suction PlateKMTBCr26
17Main Pump Impeller NutKMTBCr26
18Main Pump Agitator ImpellerKMTBCr26
19Main Pump Bracket Filter ScreenQ235
Hydraulic Slurry Pump With Dual Agitators
No.Part NameMaterial
1Agitator Five-Star MotorCast Iron
2Shaft Sleeve2Cr13
3Agitator Upper BearingGCr4
4Agitator Bearing HousingQ235
5Agitator Connection PlateQ235
6Agitator Pump Shaft40Gr
7Agitator BearingGCr4
8Bearing Lock NutA2-70
9Agitator Bearing CoverQT500
10Agitator Mechanical Seal CoverQT500
11Agitator Assembly Connection FlangeQ235
12Lock NutA2-70
13Shaft Head Pressure Sleeve AssemblyA2-70
14Agitator Head AssembltQ235
15Agitator Head Tooth RootWear Resistant Alloy
16Agitator Head Tooth TipWear Resistant Alloy

Hydraulic Submersible Dredging Pump

By turning an existing excavator into a mobile dredge pump, operators cut capital expenditure and mobilization costs. Common deployment scenarios include:

  1. Sand and Gravel Extraction: River sand pumping, reservoir desilting, and aggregate mining.
  2. Mining and Tailings Management: Cleaning out mine tailing ponds, recovering gold-bearing gravel, and pumping heavy ore slurries.
  3. Marine and Harbor Dredging: Port deepening, pier maintenance, and removing silt from navigational channels.
  4. Construction & Infrastructure: Bridge caisson dewatering, cofferdam cleanout, and bentonite slurry transfer in deep foundation works.
  5. Environmental Remediation: Removing contaminated sludge from industrial lagoons and municipal wastewater treatment plants.
Excavator Mounted Hydraulic Submersible Slurry Pump (3)
get your copy of the Amoshydro®Hydraulic submersible slurry pump handbook

Excavator brands

Amoshydro® hydraulic submersible slurry pumps are engineered with a versatile mounting interface, allowing for seamless integration with the hydraulic systems of all major global excavator brands. Whether you operate a standard crawler or a specialized amphibious machine, our pumps are compatible with:

Excavator Brands (2)
Excavator Brands (1)
Excavator Brands (3)
Excavator Brands (4)
Excavator Brands (5)
Excavator Brands (6)
Excavator Brands (7)
Excavator Brands (8)
Excavator Brands (9)
Excavator Brands (10)
Excavator Brands (11)
Excavator Brands (12)

FAQ

It comes down to power density, reliability, and safety. Electric submersible pumps are great, but they are prone to motor burnouts if they get clogged or run dry. They also present shock hazards in water.
A hydraulic submersible slurry pump handles high-density, high-viscosity sludges without burning out because the hydraulic motor is cooled by its own oil system. If a large rock jams the impeller, the hydraulic system simply hits its relief pressure and stops—no burnt windings, no ruined motors. Plus, it allows for variable speed control by adjusting the oil flow, giving you way more flexibility on-site.

We know downtime kills your profit, so we built three lines of defense:
l The Agitator: Shoves oversized rocks out of the way before they reach the inlet.
l Wide Internal Passages: Depending on the model, it lets solids up to 2.5 inches pass straight through the impeller without jamming.
l Optional Side Cutters: If you are dealing with heavy roots, sea grass, or thick clay, we can bolt on dual hydraulic cutters to shred everything before it enters the pump.

We know downtime kills your profit, so we built three lines of defense:
l The Agitator: Shoves oversized rocks out of the way before they reach the inlet.
l Wide Internal Passages: Depending on the model, it lets solids up to 2.5 inches pass straight through the impeller without jamming.
l Optional Side Cutters: If you are dealing with heavy roots, sea grass, or thick clay, we can bolt on dual hydraulic cutters to shred everything before it enters the pump.

Yes, absolutely. In fact, excavator mounted dredging pumps are one of the most efficient setups for heavy silt and sand removal.
You simply remove the bucket, use a dedicated adapter plate to connect the pump to the excavator arm, and plumb it straight into the excavator’s auxiliary hydraulic lines. This transforms your excavator into a mobile, high-capacity dredging rig that can reach into deep pits, tailing ponds, or rivers where traditional dredgers can’t go.

Standard water pumps choke on solids, but our heavy-duty slurry pumps are engineered for severe service.
Solid Handling: Depending on the pump model size (typically from 3-inch to 10-inch), they can pass large rocks and debris ranging from 20mm up to 60mm (or 1/3 of the discharge pipe diameter).
Slurry Concentration: With a built-in mechanical agitator, these pumps can handle up to 60% solids by weight. If you are pumping settled, compacted mud, adding side cutters or jetting rings can push that concentration even higher.

Slurry is basically liquid sandpaper. If you use standard cast iron, the volute and impeller will erode within weeks.
We cast all our major wet-end components—the impeller, volute casing, and wear plates—using high-chrome alloy (typically 27% to 30% Cr, Hardness ≥ 60 HRC). This metallurgic makeup provides extreme abrasion resistance against sharp sand, gravel, and mining tailings, drastically reducing your downtime and total cost of ownership.

Not necessarily, but it depends on your power source on-site.
If you have an excavator or skid steer with sufficient auxiliary hydraulic flow and pressure (GPM/PSI), you can run the pump directly off the machine.
If you are working from a barge, a crane, or a fixed mining plant with no excavator nearby, you will need a standalone diesel or electric Hydraulic Power Unit (HPU). We custom-match these power packs to deliver the exact flow rate your pump needs for peak efficiency.

Heavy solids like quartz sand, gold tailings, and gravel settle quickly at the bottom of a pit. A standard suction pump will only draw the water on top, leaving the heavy material behind and eventually clogging itself.
An agitator slurry pump features a heavy-duty, reverse-vaned mixing tool mounted directly on the shaft extending past the suction mouth. It acts like a blender, mechanically stirring up the settled solids, mixing them into a fluid slurry, and forcing them straight into the impeller. No settling, no clogging, just continuous high-density pumping.

Compare Products

Primary Applications
Mining, Dredging
-
Agitator Structure
Standard Bottom Single Agitator
-
Space Requirements
Compact design
-
Number of Hydraulic Motors
Single Motor
-

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message