Hydraulic Submersible Dredge Pumps with Cutterheads

Specification Parameter
Discharge Size:100 mm – 400 mm (4" – 16")
Flow Capacity:100 – 2,000 m³/h
Head Range:15 – 65 m
Max. Solid Concentration:Up to 60% by weight / 30% by volume
Drive Compatibility:Excavator hydraulic circuit or standalone HPU (150–350 bar)
Material Standard:High-Chrome Alloy (27% Cr / A05)
Mechanical Seal:Double Silicon Carbide Mechanical Seal
Configure for a perfect match. Fill out our technical sizing guide to ensure seamless excavator integration

Amoshydro®hydraulic submersible dredge pump with a cutterhead is an advanced heavy-duty excavation and pumping system designed to break down and extract compacted soils, hard-packed clay, silt, sand, and industrial slurry from underwater environments. By pairing a high-performance submersible slurry pump directly with a mechanically driven rotary cutterhead attachment, these systems excel where standard suction-only pumps fail—actively slicing through consolidated material beds and fluidizing them into high-density slurries before intake.

Powered entirely by auxiliary hydraulic circuits from excavators, cranes, or dedicated hydraulic power units (HPUs), these units operate safely underwater without electrical hazards, delivering massive torque and reliable continuous-duty performance in demanding marine and mining environments.

Hydraulic Submersible Mud Pump

High-performance slurry pump attachments are built to withstand severe abrasive wear and continuous heavy-load operating cycles:

  • Direct Hydraulic Drive: Eliminates electrical hazards and motor burnout risks common in wet environments.
  • High-Chrome Metallurgical Wear Parts: Impellers, volute casings, and wear plates utilize ASTM A532 27% high-chrome white iron (or customized hyperchrome alloys) to resist gouging and sliding abrasion from quartz sand, gravel, and mineral slurry.
  • Integrated Bottom Agitator: Heavy-duty mechanical agitator blades rotate at the pump intake, fluidizing compacted sediment, sand bars, and packed mud into a homogenous, pumpable slurry before it enters the impeller.
  • Robust Bearing Assemblies & Dual Mechanical Seals: Isolated oil-bath seal chambers prevent fine abrasive particles from infiltrating internal drive components, extending service life in harsh marine and industrial environments.

HTU-T Hydraulic Submersible Dredge Pumps with Cutterheads Configuration Engineered for clearing standard silt, loose sand, and high-volume mud extraction.

  • Mechanism: Features dual lateral agitator motors and agitator head assemblies flanking the main suction intake.
  • Fluid Control: Utilizes a dedicated agitator diverter valve alongside the main distribution valve to manage hydraulic oil return and overflow efficiently.
  • Application: Provides maximum agitation radius for open-water sediment removal, ensuring a steady, high-density slurry yield in uncompacted environments.
Hydraulic Submersible Slurry Pump
Hydraulic Submersible Slurry Pump With Side Cutter

HTU-S Hydraulic Submersible Dredge Pumps with Cutterheads Built for hard-packed strata, sticky clay, and the most demanding dredging conditions.

  • Mechanism: Integrates a heavy-duty side-mounted cutter motor and assembly that feeds aggressively excavated material directly into an extended suction pipe.
  • Application: Operates effectively as a localized cutter suction dredge attachment. The aggressive mechanical cutting action breaks down hardened mud and cohesive clay layers that standard agitators cannot penetrate, fluidizing the material before it enters the primary pump casing.

HTU-L Hydraulic Submersible Dredge Pumps with Cutterheads Designed for confined space operations where lateral clearance is non-existent.

  • Mechanism: An inline, streamlined design featuring a bottom-mounted cutter (auger) motor and cutter head assembly positioned directly below the strainer bracket.
  • Application: The definitive choice for caisson sinking, steel sheet pile cofferdams, and deep foundation trenching. The vertical profile allows the excavator to plunge the pump into tight cylindrical or rectangular shafts to evacuate drill cuttings and mud without snagging on support structures.
Hydraulic Submersible Slurry Pump With Bottom Cutter

HTU-T Dual Agitator Type Hydraulic Submersible Slurry Pump, HTU-L Bottom Cutter Type Hydraulic Submersible Slurry Pump, and HTU-S Side Reamer Type Hydraulic Submersible Slurry Pump are Engineered for Mud, Sand, and Large Particle Extraction

Our hydraulic submersible slurry pumps are designed to be powered by excavators or hydraulic power packs. Depending on your slurry type and project requirements, we offer most suitable pump model to ensure maximum efficiency and service life.

ConfigurationApplicationMotor/Speed SpecsKey Benefit
Mud & SlurryFine silt, soft mud, industrial waste.4-Pole Motor / 1450 RPMHigh-speed rotation for maximum flow and discharge efficiency.
Sand & AbrasiveRiver sand, tailing sand, mineral suction.6-Pole Motor / 1000 RPMLower speed reduces wear on wet-end parts, extending pump life in abrasive conditions.
Large ParticlesGravel, stones, heavy debris.Custom ConfigurationTailored RPM and internal clearances based on specific particle size and site conditions.

Excavator Attachment Hydraulic Dredging Slurry Pump Technical Data

Hydraulic Submersible Pump for Sand SpecificationSupporting hydraulic system
ModelDiameter
mm
Capacity
m3/hour
Head
m
Power
kW
Speed
r/min
Solid size
mm
Hydraulic Motor
ml/r
Pressure
Mpa
Hydraulic Flow
L/min
Excavator
Ton
HTU-L100-15150100151110002528253013
HTU-L150-201501502018.5100030452530
HTU-L200-151502001518.5100030452530
HTU-L150-221501502222100030552555
HTU-L200-171502001722100030552555
HTU-L300-102003001022100035552555
HTU-L150-30150150303010002080258020
HTU-L250-201502502030100030802580
HTU-L100-50150100504510002010725110
HTU-L250-30150250304510003510725110
HTU-L400-20200400204510004010725110
HTU-L150-4515015045551000251252513030
HTU-L250-35150250355510004012525130
HTU-L400-25200400255510004012525130
HTU-L500-18200500185510004012525130
HTU-L200-45150200457010002516027160
HTU-L350-35200350357010004016027160
HTU-L450-25200450257010004016027160
HTU-L550-20200550207010004016027160
HTU-L200-6015020060901000302002720040
HTU-L400-40200400409010005020027200
HTU-L500-28200500289010005020027200
HTU-L600-25200600259010005020027200
HTU-L400-50200400501101000352502725060
HTU-L600-302506003011010005025027250
HTU-L800-253008002511010005025027250
HTU-L1000-2030010002011010006025027250
HTU-L500-552005005513210005025027300Dual-Pump Confluence 40
HTU-L800-353008003513210005025027300
HTU-L1000-2330010002313210006025027300
HTU-L650-522006505216010004035527360Dual-Pump Confluence 60
HTU-L1000-3030010003016010005035527360
HTU-L800-553008005522010005050027500Dual-Pump Confluence 80
HTU-L1000-4030010004022010005050027500
HTU-L1250-3535012503522010005550027500
HTU-L1600-3035015003022010005550027500
HTU-L2000-2040020002022010006050027500
HTU-L1200-5030012005028010005071025710Dual-Pump Confluence 100
HTU-L1500-4035015004028010005071025710
HTU-L1500-3535015003528010005571025710
HTU-L1750-3035017503028010005571025710
HTU-L2000-2540020002528010006071025710
HTU-L1500-504001500503151000601000201000Dual-Pump Confluence 120
HTU-L2000-354002000353151000601000201000
Hydraulic Submersible Slurry Pump With Bottom Cutters
No.Part NameMaterial
1Filter screen Connecting BracketQ235
2Gearbox Type Inernal Five-star High-pressure MotorCast Iron
3Augur AssemblyQ235
4Auger Head Tooth RootWear Resistant Alloy
5Auger Head Tooth TipWear Resistant Alloy
Hydraulic Submersible Slurry Pump With Bottom Cutters

All wetted components are cast from high-wear-resistant metallurgy to withstand abrasive scouring and corrosive liquid environments.

  • Volute Casing, Impeller, & Agitator: High-Chrome White Iron Alloy (ASTM A532 Class III Type A – A05 / Cr26), hardened to 60 HRC for extreme resistance to abrasive quartz sand and gravel.
  • Corrosive/Marine Environment (Optional): Hyper-chrome alloys (A49, A33) or Duplex Stainless Steel (2205/2507) for handling acidic slurry, mining tailings, and salt-water dredging.
  • Mechanical Shaft Seal: Double mechanical seals operating in an isolated oil bath. Silicon Carbide (SiC) vs. Tungsten Carbide (TC) seal faces prevent slurry ingress into the hydraulic motor housing.
  • Frame & Structural Components: Structural heavy-plate Q350/Q460 steel with protective epoxy-marine coatings.
  • Shaft:40GR
  • Hydraulic Motor & Brackets: The top-mounted motor and adapter frames that drive the pump using fluid power from an excavator or dedicated power pack
Excavator Mounted With Hydraulic Sand Dredge Pump (2)
Electric And Hydraulic Submersible Slurry Pump(1)

The Professional Edge:

As a proven alternative to traditional electric pumps, hydraulic slurry technology is a mature and stable solution. It is the gold standard for projects in harsh environments or remote sites where power infrastructure is limited or non-existent.

Seamless Integration & Mobility

Designed for rapid deployment, the pump mounts directly to the excavator’s arm (replacing the bucket) or can be suspended from a dredging barge. This eliminates the need for complex ground support or fixed installations, simplifying site management and reducing setup time.

Enhanced Safety & Stability

Eliminate the risks associated with electrical systems. Powered entirely by hydraulic drive, these pumps pose zero risk of electric leakage in submerged environments. The system is engineered for high-load capacity and balanced power transmission, significantly extending the service life of internal components.

Engineered for High-Wear Resistance

Maximize your uptime in abrasive conditions. All critical wet-end components—including the pump casing, impeller, wear plates, and agitator—are cast from a premium High-Chrome Wear-Resistant Alloy. This high-grade material ensures stable performance during continuous operation and drastically reduces the frequency of spare part replacements.

Industry-Leading Solid Concentration

Engineered to move more than just water. These units are capable of processing high-density fluids, including mud, sand, sludge, and mortar, with solid concentrations ranging from 50% to 70%.

Maximizing Equipment Utility

Turn your excavator into a multi-purpose dredging tool. When traditional excavation reaches its limits, our hydraulic pump takes over, enabling long-distance transport of materials that would otherwise be unreachable. This adds significant versatility and ROI to your existing machinery fleet.

Amoshydro®Pump’s design allows operators to adjust oil pressure and flow as needed, accommodating different delivery tasks. The hydraulic pump station can be powered by a diesel engine or an electric motor, depending on customer needs and site conditions. Diesel engines offer a self-sufficient solution, ideal for remote areas with limited infrastructure, while electric motors provide a cost-effective and eco-friendly option where stable power is available. The hydraulic pump station can also integrate control functions like pressure regulation and remote monitoring, ensuring safe and efficient pump operation. Although this method requires a significant initial investment for the pump station, it typically results in low long-term operating costs.

The hydraulic pump station drive is a traditional method that requires a dedicated hydraulic pump station for the slurry pump. This station typically includes one or more hydraulic pumps that supply high-pressure oil to the pump’s hydraulic motor through dedicated pipes. This setup ensures stable oil pressure and flow, enabling the slurry pump to operate efficiently under various conditions.

Submersible Dredging Pump With Hydraulic Power Unit
Excavator Mounted Dredging Pump3

The excavator drive connects the hydraulic submersible slurry pump directly to the hydraulic system of the excavator. The excavator’s hydraulic pump supplies power to the slurry pump’s hydraulic motor through hydraulic lines. This method reduces equipment complexity and cost, as it eliminates the need for a separate hydraulic pump station.

Additionally, the mobility of the excavator allows for quick transfers between work sites, enhancing operational flexibility. The excavator’s hydraulic system usually provides sufficient power and flow to handle various complex conveying tasks, making this method particularly suitable for projects that demand rapid movement and frequent changes in working positions.

Dredging & River Desilting: Clearing compacted sand, silt, and sediment from rivers, lakes, reservoirs, harbors, and canals.
Port & Jetty Construction: Excavating soft seabed, underwater trenching, and caisson sinking support.
Industrial Sludge & Sewage Cleanout: Removing heavy sludge, industrial solids, and sticky mud from settling basins or wastewater lagoons.

Space-Restricted & Deep Excavation Projects: Specially engineered for open caissons, steel sheet pile cofferdams and confined working environments where lateral space is severely limited and vertical penetration is required.

Commercial Sand Mining: Direct extraction and transport of construction-grade river, lake, and silica sand.

River & Channel Maintenance: Removing heavy sediment, silt, and gravel accumulations to maintain channel depth.

Mining Tailings Recovery: Pumping high-density mineral slurries, heavy slag, and coal ash from settling ponds.

Land Reclamation & Dewatering: Moving massive volumes of seabed solids for coastal fill and infrastructure projects.

Harbor, Dock & Port Maintenance: Dredging silt, sand, and organic waste around piers, docks, and ship channels without disrupting vessel traffic or requiring large suction dredgers.

Beach Nourishment & Erosion Control: Excavating offshore sand beds and transferring material via pipeline to restore eroded beaches and reinforce seawalls.

Bridge Pier & Subsea Foundation Prep: Clearing soft seabed mud and gravel prior to placing caissons, driving structural piles, or laying underwater utility cables.

Capital Dredging & Marina Cleaning: Expanding water depth in shallow bays, inlets, and private marinas where traditional cutter suction dredgers cannot physically maneuver.
Industrial & Municipal Services: Pumping thick sludge from wastewater treatment settling tanks, steel plant scale pits, and power plant ash ponds.

Excavator Slurry Pump Attachments: Pinning directly onto standard hydraulic excavators (Cat, Komatsu, Volvo, etc.) for rapid deployment in remote or restricted-access job sites.

Construction & Infrastructure Dewatering: Handling heavy bentonite mud in foundation drilling, caisson sinking, and tunneling operations.

Industrial Wastewater & Sludge Ponds: Cleaning settling basins, scale pits in steel mills, and paper mill effluent lagoons without clogging.

Gemini Generated Image Oa28kpoa28kpoa28
Excavator Mounted Submersible Dredging Pump With Agitators
Excavator Mounted Hydraulic Submersible Slurry Pump
get your copy of the Amoshydro®Hydraulic submersible slurry pump handbook

Excavator brands

Amoshydro® hydraulic submersible slurry pumps are engineered with a versatile mounting interface, allowing for seamless integration with the hydraulic systems of all major global excavator brands. Whether you operate a standard crawler or a specialized amphibious machine, our pumps are compatible with:

Excavator Brands (2)
Excavator Brands (1)
Excavator Brands (3)
Excavator Brands (4)
Excavator Brands (5)
Excavator Brands (6)
Excavator Brands (7)
Excavator Brands (8)
Excavator Brands (9)
Excavator Brands (10)
Excavator Brands (11)
Excavator Brands (12)

FAQ

Yes. Unlike electric submersible pumps that rely on the pumped liquid to cool the motor stator, the Amoshydro® hydraulic motor is continuously cooled and lubricated by circulating hydraulic fluid. The unit can run dry under “snore” conditions (intermittent air/water draw) indefinitely without thermal shutdown, motor coil burnout, or seal damage.

Impeller & Wear Plates: Precision-cast from High-Chrome Alloy (Cr26 / A05 metallurgy) with a hardness rating of ge 58HRC to resist sliding abrasion from silica sand and gravel.Pump Casing: Heavy-walled ductile iron (QT450-10) engineered to absorb high impact from particulate solids and hydraulic shock loads.

The drive shaft is protected by a dual mechanical seal system featuring silicon carbide vs. silicon carbide ($\text{SiC/SiC}$) sealing faces. The seals are housed in an isolated, pressure-compensated oil bath chamber that balances internal pressure against external hydrostatic water pressure, preventing slurry intrusion even at extended operating depths.

The mechanical drive assembly features a dual mechanical shaft seal housed within an oil-lubricated barrier chamber. This design keeps seawater and abrasive particles away from the motor bearings and shaft, even when operating at submerged depths where water ambient pressure is high. Additionally, external surfaces are treated with multi-coat marine-grade epoxy paint systems.

Freshwater Flush: Immediately following operations in thick mud, bentonite, or saline environments, submerge the pump in a clean water basin and run it at low hydraulic flow for 3 to 5 minutes to flush internal sediment and prevent mud calcification inside the casing.

Hose Storage: Cap the quick-disconnect hydraulic fittings immediately upon detachment to prevent airborne dirt and moisture from entering the hydraulic motor circuit.

Compare Products

Agitator Structure
Composite Multi-blade Agitator
Standard Bottom Single Agitator
Space Requirements
Requires larger operating clearance
Compact design
Primary Applications
Deepwater Dredging
Mining, Dredging
Number of Hydraulic Motors
Dual/Triple Motors
Single Motor

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message