Choosing the correct hydraulic submersible slurry pump configuration depends on structural design and site-specific operating conditions. The Amoshydro® HTU Series Hydraulic Submersible Slurry Pump delivers specialized solutions engineered for severe liquid-solid material extraction.
Below is a detailed breakdown of the structural features and application scopes for the HTU-T Series (Dual Side Agitators), HTU-S Series (Side Cutter Head), and HTU-L Series (Bottom Cutter Head) to help you choose the right pump for your site requirements.
Technical & Structural Comparison
| Feature / Parameter | HTU-T Series (Dual Agitator) Hydraulic Submersible Slurry Pump | HTU-S Series (Side Cutter) Hydraulic Submersible Slurry Pump | HTU-L Series (Bottom Cutter) Hydraulic Submersible Slurry Pump |
| Structural Design | Dual external agitator motors & bearing assemblies mounted on side support frames | Side-mounted cutter head assembly with dedicated motor, suction pipe, and support frame | Bottom-mounted cutter head assembly with in-line cutter motor and cutter head shaft |
| Key Components | Agitator motors, agitator bearing bodies, flow divider valves, dual agitators | Side cutter motor, cutter head assembly, intake pipe, flow divider valve | Bottom cutter motor, main bearing body, cutter head shaft, cutter assembly |
| Primary Working Mechanism | Hydraulic agitation & fluidization | Mechanical side shearing & guided suction | Direct downward cutter excavation |
| Application Scope | Silt clearing & soft/loose sand pumping | Hard-packed seabed, sticky clay & heavy slurry conditions | Open caissons, steel sheet pile cofferdams & space-restricted sites |
Structural Features & Application Scopes
1. HTU-T Series Hydraulic Submersible Slurry Pump (Dual Agitator Configuration)
Structural Highlights:
- Equipped with two heavy-duty agitator assemblies mounted on external side support frames.
- Features independent agitator motors, dedicated agitator bearing bodies, and a flow-divider valve system to maintain balanced hydraulic power distribution between the main pump motor and agitators.
- Dual agitator heads operate at the base to homogenize settled sediments before suction.
Application Scope:
- Silt Clearing & Soft Sand Pumping: Specifically designed for fluidizing loose sand, soft mud, silt accumulations, and uncompacted slurries where hydraulic resuspension is sufficient without heavy mechanical cutting.
2. HTU-S Series Hydraulic Submersible Slurry Pump (Side Cutter Configuration)
Structural Highlights:
- Features an offset side-cutter head assembly connected directly to a high-torque cutter motor and lower bearing frame.
- Integrated suction pipe positioned right at the cutter zone to draw in mechanically loosened material instantly.
- Built-in hydraulic flow divider valves coordinate power between the main pump drive and the cutter drive.
Application Scope:
- Hard-Packed & Sticky Formations: Ideal for heavy-duty dredging in hard pan, consolidated mud, dense clay, and complex soil conditions requiring high mechanical shearing force to break down material before pumping.
3. HTU-L Series Hydraulic Submersible Slurry Pump (Bottom Cutter Configuration)
Structural Highlights:
- Vertical, in-line structure featuring a bottom cutter head assembly attached directly beneath the pump body.
- Driven by a bottom-mounted cutter motor and heavy-duty shaft assembly running aligned with the pump body axis.
- Compact cross-sectional profile designed specifically for narrow, restricted vertical entry points.
Application Scope:
- Space-Restricted & Deep Excavation Projects: Specially engineered for open caissons , steel sheet pile cofferdams , and confined working environments where lateral space is severely limited and vertical penetration is required.
Quick Selection Summary
- Select HTU-T (Dual Agitator) for loose, soft sand and routine silt removal where high fluidization and flow rates are needed.
- Select HTU-S (Side Cutter) for hard, sticky, or highly consolidated soils requiring side mechanical chopping and direct intake feeding.
- Select HTU-L (Bottom Cutter) for vertical sinking tasks in open caissons, sheet piling, or spatially constrained sites.
Ready to Upgrade Your Machine’s Capability?
Whether you are looking to clear settled silt in a pond or convert your fleet for heavy industrial dredging, the Amoshydro® excavator hydraulic slurry pump offers a cost-effective, plug-and-play solution.
Contact our engineering team today to match your excavator model (15to 45tons) with the optimal pump flow rate, pressure specs, and hose setups.
