How to Connect a Hydraulic Submersible Dredging Pump to an Excavator: Complete Oil Hose Setup Guide

September 24, 2026
#hydraulic submersible slurry pump for excavator #hydraulic submersible dredging pump #River sand mining pump #Excavator sand pump attachment

Connecting a hydraulic submersible dredging pump to an excavator’s auxiliary hydraulic system (PTO) is one of the most efficient ways to convert standard heavy equipment into a high-capacity dredging machine. However, improper hydraulic line installation can lead to motor damage, seal failures, or loss of pumping pressure.

In this guide, we break down the exact step-by-step oil hose connections required to safely hook up an Amoshydro® hydraulic submersible slurry pump to your excavator.

Understanding the 3 Key Hydraulic Hose Connections

An Amoshydro® hydraulic submersible dredging pump relies on three main hydraulic oil hoses to operate seamlessly with an excavator:

1. Pump Oil Inlet Hose (High-Pressure Supply Line)

  • Function: Delivers high-pressure hydraulic oil from the excavator to drive the pump’s internal hydraulic motor.
  • Connection Point: Connects the pump’s upper inlet port directly to the oil outlet (auxiliary hydraulic line) on the excavator’s arm.

2. Pump Oil Outlet Hose (Return Line)

  • Function: Directs spent hydraulic oil back to the excavator’s hydraulic system after passing through the pump motor.
  • Connection Point: Connects the pump’s lower outlet port back to the return oil line of the excavator.

3. Overflow / Motor Drain Pipe (Case Drain Line)

  • Function: Relieves internal pressure accumulation inside the hydraulic motor housing to protect shaft seals from blowing out.
  • Connection Point: This thin line must be connected directly to the excavator’s hydraulic oil tank (bypassing main control valves and return filters to ensure zero backpressure).

Step-by-Step Excavator Attachment Checklist

  1. Mounting the Pump: Secure the Amoshydro® pump onto the excavator arm using custom adapter brackets or quick-couplers.
  2. Connecting the Case Drain Line First: Always connect the thin overflow/case drain hose directly back to the main hydraulic tank.
  3. Connecting Supply and Return Lines: Attach the high-pressure inlet and return hoses using heavy-duty quick-disconnect fittings.
  4. Pre-Start Verification: Ensure all hydraulic fittings are tightened, check oil levels, and gradually engage the auxiliary hydraulic pedal/switch to test motor rotation direction.

Why Choose Amoshydro® Excavator-Mounted Dredging Pumps?

  • Seamless Excavator Integration: Designed to match standard hydraulic pressures and flow rates across major excavator brands (CAT, Komatsu, Volvo, SANY, Hitachi).
  • Heavy-Duty Agitator: High-chrome mechanical agitator breaks up hard-compacted sediment and tailings.
  • Maximum Uptime: Protected by dedicated case drain systems and heavy-duty mechanical seals to ensure long service life under deep hydrostatic conditions.

Promotional Copy & Call to Action

If you are looking to maximize your river dredging output while cutting operational downtime, the Amoshydro® HTU Series hydraulic submersible slurry pump is your ultimate choice. Designed for seamless mounting on major excavator brands, our pumps turn standard excavators into mobile, high-yield dredging units.

Compare Products

Agitator Structure
Composite Multi-blade Agitator
-
Space Requirements
Requires larger operating clearance
-
Primary Applications
Deepwater Dredging
-
Number of Hydraulic Motors
Dual/Triple Motors
-

Ready to Unleash Your Excavator’s True Potential?

Stop stalling on tough terrains. Contact our engineering team today for a tailored RPM and torque configuration designed specifically for your site's geology. Let’s turn your unpumpable challenges into measurable progress.

Takes 1 minute. Best for rough budgeting.

Takes 3-5 minutes. Best for exact pricing and site compatibility.

Medium Type
Power Supply
Agitator / Cutter Type
Download The Product Catalog
Send Us a Message